View Poll Results: What to sticky?????
Gym, Tan, Long Island
69
14.08%
Fist pump
421
85.92%
Voters: 490. You may not vote on this poll
Calling all Cobalts on L.I.
#226
figured out and fixed the problem with my car this morning all is good. Guys that were there, remember I said it's not reading the primary o2? well when I went to do it thurs I unplugged it, coudn't find my o2 socket, and forgot to plug it back in... lol. new sensor installed this morning and car is running like a champ... no more 11:1 afr at idle... lol
Mezzano, I want a rematch, my car was breaking up bad, but it still pulled to 145 mph last night.... but you were out on my ass... that damn vette is a monster, but with my 8:1 afr's car just wasn't pulling
Mezzano, I want a rematch, my car was breaking up bad, but it still pulled to 145 mph last night.... but you were out on my ass... that damn vette is a monster, but with my 8:1 afr's car just wasn't pulling
#227
Senior Member
Join Date: 03-07-06
Location: Nassau County Long Island NY
Posts: 942
Likes: 0
Received 0 Likes
on
0 Posts
yeah it wasn't fair at all I got the hit and was in front plus like you said your car was fucked up. First and second I was fighting for traction but once in third the car was pulling like crazy then to fourth look down and im at 150. I was like **** so i hit the brakes quickly and forgot I was in the middle lane, car ******* pulled left and right like crazy. Then there was that cop too but I was down to 70 by the time I passed him. Got lucky I didn't decide to stay in it till 180.
Last edited by mezzanno; 05-26-2007 at 07:11 PM.
#230
Senior Member
Join Date: 03-07-06
Location: Nassau County Long Island NY
Posts: 942
Likes: 0
Received 0 Likes
on
0 Posts
I might be heading up, not sure if anyone is doing anything around me. Got work to do in the apartment as well. Plus I didn't go to bed until 5 and was up for work at 7:30 so it's likely just a matter of time before i pass out but we'll see what happens.
#235
paul. i didnt mean anything by that. i understand how the this is new to you. its just running funny.. ONLY AT THE START UP. after that its fine. i <3 you for even attempting my car lol. so take your time and ****. im in no rush.. the more time the better. that whay everything can get figured out perfectly. first i gotta get my car back then fix the axel/exhuast problem. then finish my sub wall. whenever you want let me know. ill meet you up on day or something and then you can mess around with the car. i might be at DPA tonight but without my car since its still in the shop. ******* pot holes.
im dont aspect u to drop everything, thats why i was doing research on my own about the problem and sending u ideas on what it could be. i really dont want to run a car lean...thats pretty bad. im not trying to be a jerk. yeah this is new to be, the whole tuning aspect of hptuners. i asked several guys about this cel that has been a common issue with the 2.4 so u dont have to do it. im letting u do what u want. im not say hey paul come to my house and fix this. i totally appericiate u helping me out. while we are doing this..i have talked to at least 3-4 kids that want u tune there car once this is figured out, so by me talking to them..im trying to make u money for helping me out. i appericiate all u have done for me,joe,etc. cmon dude ur BCP..god of all cobalts.i havent been into cars as long as u so this is just a learning experience. sorry paul.
Anyway I''ll be up at DPA tonight if you want to roll through for me to check out the car
Last edited by 06blackg85ss; 05-26-2007 at 08:48 PM. Reason: Automerged Doublepost
#236
paul i tried callin u 2nite, to let u know wuts goin on with the car. i guess it learned the tune. my cel has not been on for 3 days or my t/c light till just till tonight. i pulled over turned the car off and it was off. umm the only thing is the shifting is like from 1st to 2nd. its 2nd to 3rd its shifts higher then the other gears. maybe if ur around this upcoming week ill take a trip out by u and just to fix up that. other than that ill be gettin the tranny cooler next week, if joe gets his car back and running..him and i are going to order one together. parents dont know bout the mods..lol. except the intake cuz its loud. also im lookin for better rotors...any suggestions...and u think its easy to install?
paul i tried callin u 2nite, to let u know wuts goin on with the car. i guess it learned the tune. my cel has not been on for 3 days or my t/c light till just till tonight. i pulled over turned the car off and it was off. umm the only thing is the shifting is like from 1st to 2nd. its 2nd to 3rd its shifts higher then the other gears. maybe if ur around this upcoming week ill take a trip out by u and just to fix up that. other than that ill be gettin the tranny cooler next week, if joe gets his car back and running..him and i are going to order one together. parents dont know bout the mods..lol. except the intake cuz its loud. also im lookin for better rotors...any suggestions...and u think its easy to install? dont worry man. ive had rough days too...and the posts were yeah uncalled for..im was lookin for some other help..but yes ur the man and we all know that...BCP is a god...lol. hit me during the week bro.
paul i tried callin u 2nite, to let u know wuts goin on with the car. i guess it learned the tune. my cel has not been on for 3 days or my t/c light till just till tonight. i pulled over turned the car off and it was off. umm the only thing is the shifting is like from 1st to 2nd. its 2nd to 3rd its shifts higher then the other gears. maybe if ur around this upcoming week ill take a trip out by u and just to fix up that. other than that ill be gettin the tranny cooler next week, if joe gets his car back and running..him and i are going to order one together. parents dont know bout the mods..lol. except the intake cuz its loud. also im lookin for better rotors...any suggestions...and u think its easy to install? dont worry man. ive had rough days too...and the posts were yeah uncalled for..im was lookin for some other help..but yes ur the man and we all know that...BCP is a god...lol. hit me during the week bro.
Last edited by iLLmaTic3s; 05-27-2007 at 12:00 AM. Reason: Automerged Doublepost
#240
Senior Member
Join Date: 05-04-07
Location: somewhere
Posts: 1,845
Likes: 0
Received 0 Likes
on
0 Posts
#244
I'll only be making a few appearences out there this year (bald hill) since it takes me like 3 hr's to get there from my job.
Also my balt is gonna be down for a while. the s/c is finally starting to let go. You don't even want to hear the noises it's making... f'n scary. But I'll finish the uber port job and I'll be building it with the ceramic ball bearing setup and new needle bearings. So when I go turbo I'll have a 20k rpm setup for sale (can you say 2.35 pulley) Now that's two I have to do now, I'm also building one for mezzano. let the fun begin
Also my balt is gonna be down for a while. the s/c is finally starting to let go. You don't even want to hear the noises it's making... f'n scary. But I'll finish the uber port job and I'll be building it with the ceramic ball bearing setup and new needle bearings. So when I go turbo I'll have a 20k rpm setup for sale (can you say 2.35 pulley) Now that's two I have to do now, I'm also building one for mezzano. let the fun begin
#245
Senior Member
Join Date: 05-04-07
Location: somewhere
Posts: 1,845
Likes: 0
Received 0 Likes
on
0 Posts
I'll only be making a few appearences out there this year (bald hill) since it takes me like 3 hr's to get there from my job.
Also my balt is gonna be down for a while. the s/c is finally starting to let go. You don't even want to hear the noises it's making... f'n scary. But I'll finish the uber port job and I'll be building it with the ceramic ball bearing setup and new needle bearings. So when I go turbo I'll have a 20k rpm setup for sale (can you say 2.35 pulley) Now that's two I have to do now, I'm also building one for mezzano. let the fun begin
Also my balt is gonna be down for a while. the s/c is finally starting to let go. You don't even want to hear the noises it's making... f'n scary. But I'll finish the uber port job and I'll be building it with the ceramic ball bearing setup and new needle bearings. So when I go turbo I'll have a 20k rpm setup for sale (can you say 2.35 pulley) Now that's two I have to do now, I'm also building one for mezzano. let the fun begin
#246
Senior Member
Join Date: 07-07-06
Location: Long Island, NY
Posts: 2,955
Likes: 0
Received 0 Likes
on
0 Posts
#247
Senior Member
Join Date: 05-04-07
Location: somewhere
Posts: 1,845
Likes: 0
Received 0 Likes
on
0 Posts
#250
I'll be charging btwn $400-500 per blower depending on if you want a port and polish on it too.
Yeah balt is down, my needle bearings finally gave up on life. Wish I had remembered to repack em before hand lol. Oh well that's what spares are for anyway. Just ordered new needle bearings and a case of s/c grease and oil for future rebuilds... just wish it held together the 2-3 more weeks I needed until I went turbo. But **** happens what can I say
Yeah balt is down, my needle bearings finally gave up on life. Wish I had remembered to repack em before hand lol. Oh well that's what spares are for anyway. Just ordered new needle bearings and a case of s/c grease and oil for future rebuilds... just wish it held together the 2-3 more weeks I needed until I went turbo. But **** happens what can I say