Mark this thread as Unsold
For Sale Brembo's, Pads, and Parts
12-01-2013, 09:38 PM
#1
New Member
Thread Starter
Join Date: 10-02-08
Location: Michigan
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Brembo's, Pads, and Parts
Re-posting this with pics this time!
ok, don't judge me here for being stupid haha.. I replaced my calipers because I couldn't get the pins out of my stock ones, I came across a deal with two calipers that didn't have the seals or pistons.. so I took them out of my stock ones and now I'm on the road again.. but in the process.. I now have extra parts that I don't need.. and figured someone here might want them..
Prices:
Brembo Calipers (both sides) $170 shipped
Factory Brembo Brand Pads (new and unused) $55 shipped
Brembo Pins/Plates (2 sets)(new and unused) $40 shipped
-Driver Side Brembo Caliper
(no pistons, or seals, has all 4 boots, small tears in a couple boots, 1 pin out, other bit cut and needs to be drilled out)
-Passenger Side Brembo Caliper
(no pistons, or seals, has all 4 boots, small tears in a couple boots, pins were professionally machined out, and are ready for new pins)
-2 sets of caliper pins from crate engine depot, has 4 pins, and 2 metal retainer clips never used
-1 random used retainer clip
-2 sets of authentic factory Brembo brake pads, 4 pads, all have backing plates as well
please give me reasonable offers on these.
parts are located in michigan, local pickup is preferred.. but If I need to ship.. please take that into account also.
I may even be open for trades on parts also.. Headlights (stock), and possibly other things.. lemme know what ya got.
-Jeremy
Calipers Outside
Calipers Inside
Brake Pads
Brackets and Pins
ok, don't judge me here for being stupid haha.. I replaced my calipers because I couldn't get the pins out of my stock ones, I came across a deal with two calipers that didn't have the seals or pistons.. so I took them out of my stock ones and now I'm on the road again.. but in the process.. I now have extra parts that I don't need.. and figured someone here might want them..
Prices:
Brembo Calipers (both sides) $170 shipped
Factory Brembo Brand Pads (new and unused) $55 shipped
Brembo Pins/Plates (2 sets)(new and unused) $40 shipped
-Driver Side Brembo Caliper
(no pistons, or seals, has all 4 boots, small tears in a couple boots, 1 pin out, other bit cut and needs to be drilled out)
-Passenger Side Brembo Caliper
(no pistons, or seals, has all 4 boots, small tears in a couple boots, pins were professionally machined out, and are ready for new pins)
-2 sets of caliper pins from crate engine depot, has 4 pins, and 2 metal retainer clips never used
-1 random used retainer clip
-2 sets of authentic factory Brembo brake pads, 4 pads, all have backing plates as well
please give me reasonable offers on these.
parts are located in michigan, local pickup is preferred.. but If I need to ship.. please take that into account also.
I may even be open for trades on parts also.. Headlights (stock), and possibly other things.. lemme know what ya got.
-Jeremy
Calipers Outside
Calipers Inside
Brake Pads
Brackets and Pins
Last edited by jdseibe; 12-20-2013 at 02:52 PM.
12-02-2013, 10:32 AM
#4
New Member
Thread Starter
Join Date: 10-02-08
Location: Michigan
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
12-02-2013, 08:46 PM
#8
New Member
Thread Starter
Join Date: 10-02-08
Location: Michigan
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
and I respectfully decline your offer. piston and seals kit for both calipers would be about 100+shipping from crate engine depot. $100 shipped is just too low for me sorry. The calipers can very easily be saved. if there was that big of a concern about them. nobody would be interested in them.
12-02-2013, 09:08 PM
#10
and I respectfully decline your offer. piston and seals kit for both calipers would be about 100+shipping from crate engine depot. $100 shipped is just too low for me sorry. The calipers can very easily be saved. if there was that big of a concern about them. nobody would be interested in them.
as someone pointed out, new calipers are 325.00 or so ...not trying to side bust, just answering the offer, and no problem with your refusing, GLWS you got an 50 dollar bump already.
12-02-2013, 09:46 PM
#11
New Member
Thread Starter
Join Date: 10-02-08
Location: Michigan
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
just a note.. new calipers are $259 a piece on crate engine depot.. best deal I have found.. I think you are saying that you can get a used set with pistons for 325.. and thats fine.. I'm not asking that.. but even then.. my asking 200 + 100 for seals and pistons.. plus shipping still would be about the same.. and I'm not expecting to get that full 200.. its a point of negotiation. thanks for the interest though.
12-04-2013, 10:53 AM
#14
New Member
Thread Starter
Join Date: 10-02-08
Location: Michigan
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
-Jeremy
Thread
Thread Starter
Forum
Replies
Last Post