Mark this thread as Unsold
For Sale Complete Car Part Out: Built motor, side skirts, fender, doors, etc...
#1
Complete Car Part Out: Built motor, side skirts, fender, doors, etc...
Ok guys this is the second for sale thread. I have the car on jack stands now and willing to sell everything off the car. If you want something that is not on the list let me know and i tell you if i have it or not.
Pricing below does not have any shipping included. But i will be using flat rate boxes to help the cost. so small boxes are 5.35, medium boxes are 11.35, and large boxes are 15.45. so if the item fits in the boxes it ships.
I'm not willing to part out the part of the motor, but i'm willing to part out the bottom block and the head. Pricing is below.
I have tons of parts so just message me what you want and i will tell you what i got.
Willing to sell parts together such as:
Built Block-10:1 .020 overbore Pistons, eagle Rods, Neutral Balance Shafts, Hardened Oil Pump Gears, ARP Head Studs, Bates Sleeves, exedy flywheel and Clutch $3,500
Ported Head with Supertech Dual Spring Kit-$1,500
the build thread: https://www.cobaltss.net/forums/2-2l...thread-238062/
$4,000 SHIPPED FOR THE BUILT MOTOR WITH FLYWHEEL AND CLUTCH. WILL BE USING CRATING SERVICE TO SHIP IT NOT UPS OR FEDEX
Exterior/Interior
SS Side Skirts 150
Gen 1 Headlights with halo rings 100
1 Black Housing Driver Headlight 25
Front Emblem 15
18" Drag DR-18 Wheels with tires 600
Fenders 50
Doors 150
Stock tan seats front and back 150
Steering wheel 50
Dash trim 20
Glove box 20
Modern performance 3 gauge pod 20
Blue Harness Belts 20
12 Inch Box 50
1600 Watt Amp 75
Pioneer Door Speakers 75
Pioneer Rear Speakers 75
Optima Battery 125
Hood 100
Head light bracket 50
Performance
Powdercoated Valve Cover 75
Mandrel Bend 3" Exhaust 200
LSJ Tensioner Pulley 20
Metco Valve Breather 30
90 Degree AN Fitting 10
Black Stainless Steel Lines 5
LSJ Intake Manifold 200
Powdercoated TurboTech Motor Mount 125
Poly Tranny Mounts SOLD
M62 3.0 Pulley 20
M62 2.9 Pulley 20
Bosch Intercooler Pump SOLD
IC Pump Pigtail Connection 20
IC bracket 50
Powdercoated & Ported LSJ Throttle Body 100
Exedy Stage 2 Clutch 150
Exedy Lightweight Flywheel 150
custom Grind Cams 50
Timing Cover 75
Cam Tool 50
Wheels and Suspension
Powdercoated Front Calipers 100
Powdercoated Rear Drums 75
Progress Rear Sway Bar SOLD
DC Front Strut Bar 75
FOR EVERYONE PM'D ABOUT THE ARM REST. I DO NOT HAVE THE ARM REST............
this is how it stands now
Pricing below does not have any shipping included. But i will be using flat rate boxes to help the cost. so small boxes are 5.35, medium boxes are 11.35, and large boxes are 15.45. so if the item fits in the boxes it ships.
I'm not willing to part out the part of the motor, but i'm willing to part out the bottom block and the head. Pricing is below.
I have tons of parts so just message me what you want and i will tell you what i got.
Willing to sell parts together such as:
Built Block-10:1 .020 overbore Pistons, eagle Rods, Neutral Balance Shafts, Hardened Oil Pump Gears, ARP Head Studs, Bates Sleeves, exedy flywheel and Clutch $3,500
Ported Head with Supertech Dual Spring Kit-$1,500
the build thread: https://www.cobaltss.net/forums/2-2l...thread-238062/
$4,000 SHIPPED FOR THE BUILT MOTOR WITH FLYWHEEL AND CLUTCH. WILL BE USING CRATING SERVICE TO SHIP IT NOT UPS OR FEDEX
Exterior/Interior
SS Side Skirts 150
Gen 1 Headlights with halo rings 100
1 Black Housing Driver Headlight 25
Front Emblem 15
18" Drag DR-18 Wheels with tires 600
Fenders 50
Doors 150
Stock tan seats front and back 150
Steering wheel 50
Dash trim 20
Glove box 20
Modern performance 3 gauge pod 20
Blue Harness Belts 20
12 Inch Box 50
1600 Watt Amp 75
Pioneer Door Speakers 75
Pioneer Rear Speakers 75
Optima Battery 125
Hood 100
Head light bracket 50
Performance
Powdercoated Valve Cover 75
Mandrel Bend 3" Exhaust 200
LSJ Tensioner Pulley 20
Metco Valve Breather 30
90 Degree AN Fitting 10
Black Stainless Steel Lines 5
LSJ Intake Manifold 200
Powdercoated TurboTech Motor Mount 125
Poly Tranny Mounts SOLD
M62 3.0 Pulley 20
M62 2.9 Pulley 20
Bosch Intercooler Pump SOLD
IC Pump Pigtail Connection 20
IC bracket 50
Powdercoated & Ported LSJ Throttle Body 100
Exedy Stage 2 Clutch 150
Exedy Lightweight Flywheel 150
custom Grind Cams 50
Timing Cover 75
Cam Tool 50
Wheels and Suspension
Powdercoated Front Calipers 100
Powdercoated Rear Drums 75
Progress Rear Sway Bar SOLD
DC Front Strut Bar 75
FOR EVERYONE PM'D ABOUT THE ARM REST. I DO NOT HAVE THE ARM REST............
this is how it stands now
Last edited by stenguyen1; 10-16-2012 at 10:54 AM.
#5
well it got in a wreck in the rear. but this been in the garage for like months now.
the car looks as bad as it is cuz we took everything off the car lol.
powdercoated color is purple star light with ultimate chrome base.
PURPLE STARLIGHT
the custom grind cams? they about 20-25k on them. and pix of the side skirt is what you see in my threads. nothing different.
powdercoated color is purple star light with ultimate chrome base.
PURPLE STARLIGHT
#14
here is the black stock driver light only
the gen one headlights are the same ones in the pix. its also has the halos on them and painted the chamilian color also. the eye lids are vinyl. they have stress makes all over the passenger light. so may have to get a new lens.
shift boot is out of shape and torn. which retainers are you needing?
#25
steven, i'll take the skirts depending on how much the body shop says 1 will cost. stupid lady hit my car but at least she has insurance...all i need is one side technically.
would you mind delivering them to my parents place in katy?
would you mind delivering them to my parents place in katy?