Mark this thread as Unsold
FS: GM Stage 3 PCM / 06-07 Cobalts
08-04-2008, 11:11 PM
#1
Senior Member
Thread Starter
iTrader: (3)
Join Date: 05-20-07
Location: MN
Posts: 772
Likes: 0
Received 0 Likes
on
0 Posts
FS: GM Stage 3 PCM / 06-07 Cobalts
I have a GM Stage 3 PCM up for sale. I'm selling it because I'm just getting into tuning myself and just purchased HP Tuners.
Asking $309 shipped in the U.S.
- $329 for CA 
PM me an offer!
12610645 Cobalt Stage 3 PCM 2006-07
The PCM is equipped with a user adjustable rev limit from 6750 to 8000 rpm. The rev limit is adjusted by pressing on the throttle pedal with the ignition on and engine off. At about 50% throttle the tachometer will show the current rev limit. Pressing the throttle further will adjust the rev limit in 250 rpm increments. This PCM is also equipped with a control scheme for the equivalent of a 50-horse shot of Nitrous. The PCM will automatically provide the proper spark and fuel for A Nitrous up to 500 rpm below the current selected rev limit when the trigger is activated.
Note:The Stage 3 kit is for off-road use only. The Stage 3 upgrades are meant for off-road use only and are not certified to be emissions legal. The vehicle's air conditioning is disabled by the stage 3 PCM.
Link to Stage 3 FAQ
Asking $309 shipped in the U.S.
- $329 for CA PM me an offer!
12610645 Cobalt Stage 3 PCM 2006-07
The PCM is equipped with a user adjustable rev limit from 6750 to 8000 rpm. The rev limit is adjusted by pressing on the throttle pedal with the ignition on and engine off. At about 50% throttle the tachometer will show the current rev limit. Pressing the throttle further will adjust the rev limit in 250 rpm increments. This PCM is also equipped with a control scheme for the equivalent of a 50-horse shot of Nitrous. The PCM will automatically provide the proper spark and fuel for A Nitrous up to 500 rpm below the current selected rev limit when the trigger is activated.
Note:The Stage 3 kit is for off-road use only. The Stage 3 upgrades are meant for off-road use only and are not certified to be emissions legal. The vehicle's air conditioning is disabled by the stage 3 PCM.
Link to Stage 3 FAQ
Last edited by sput; 08-05-2008 at 01:30 PM.
08-04-2008, 11:17 PM
#5
Senior Member
Thread Starter
iTrader: (3)
Join Date: 05-20-07
Location: MN
Posts: 772
Likes: 0
Received 0 Likes
on
0 Posts
Yes it is :P It was way fun too! I decided to learn to tune though instead of keeping it.
Last edited by sput; 08-04-2008 at 11:17 PM. Reason: Automerged Doublepost
08-04-2008, 11:21 PM
#6
Senior Member
iTrader: (2)
Join Date: 05-31-07
Location: SoCal, Lancaster
Posts: 4,339
Likes: 0
Received 0 Likes
on
0 Posts
man is my vin # getting around! not like i have any waranty anyways lol
by the way computer was ordered for a 07 approx sept oct of 07 and worked very well for me and others
bump for almost $100 off retail
ccp
by the way computer was ordered for a 07 approx sept oct of 07 and worked very well for me and others
bump for almost $100 off retail
ccp
Last edited by hungryhip-ccp; 08-04-2008 at 11:42 PM. Reason: Automerged Doublepost
08-05-2008, 12:33 AM
#10
Senior Member
Thread Starter
iTrader: (3)
Join Date: 05-20-07
Location: MN
Posts: 772
Likes: 0
Received 0 Likes
on
0 Posts
08-05-2008, 12:55 AM
#12
Senior Member
iTrader: (2)
Join Date: 05-31-07
Location: SoCal, Lancaster
Posts: 4,339
Likes: 0
Received 0 Likes
on
0 Posts
so you had to do case relearn? huh i wonder why me and rockrawler didnt have to...
and i also just learned that the new version of interceptors have a option in them to do case relearn! my old one did not! kinda cool
08-05-2008, 08:34 AM
#13
Senior Member
Thread Starter
iTrader: (3)
Join Date: 05-20-07
Location: MN
Posts: 772
Likes: 0
Received 0 Likes
on
0 Posts
Yeah.. well there was no CEL but the code for the crank sensor was in the system so I went and had it done.
I have the interceptor with the case learn option but it doesn't work. I tried it 3 times. You either have to do it with HP Tuners or take it to the dealer still. Bummer.. I know.
I have the interceptor with the case learn option but it doesn't work. I tried it 3 times. You either have to do it with HP Tuners or take it to the dealer still. Bummer.. I know.
08-09-2008, 11:10 PM
#16
Senior Member
Thread Starter
iTrader: (3)
Join Date: 05-20-07
Location: MN
Posts: 772
Likes: 0
Received 0 Likes
on
0 Posts
Please let me know if you have any questions. Trade offers are also welcome!
A couple items on my wants list:
black wingless trunk lid
LC-1 wideband
60lb flow matched injectors
gmpp pedals :P
A couple items on my wants list:
black wingless trunk lid
LC-1 wideband
60lb flow matched injectors
gmpp pedals :P
Last edited by sput; 08-11-2008 at 09:41 AM.
08-28-2008, 04:56 PM
#25
Senior Member
iTrader: (2)
Join Date: 05-31-07
Location: SoCal, Lancaster
Posts: 4,339
Likes: 0
Received 0 Likes
on
0 Posts
hmm people are broke right now... if i were you i would make a thread about how you can go stage three and avoid the dealer and voiding warentee by just buying 42's this ecm and whatever pulley they wanna run for like 500 total...
nates 2.9 $50
ecm $300
42's $150
you will get a bite for sure then...
killer deal and the dealership knows nothing...
nates 2.9 $50
ecm $300
42's $150
you will get a bite for sure then...
killer deal and the dealership knows nothing...