Screamin!

I bought this about a year and half ago, used it for 4 months - and has been sitting ever since. It works great, looks great, nothing at all wrong with it. It just wont work with my new system. It's the 04 model with the chrome on it. I paid $400 for it and will sell it for $300 +shipping.


Rockford Fosgate P600.1bd
Number of Channels 1
Rated Power 325 W x 1 @ 4 Ohms RMS
600 W x 1 @ 2 Ohms RMS
Total Power 600 Watts
Bridgeable No
Crossover Controls Low-Pass (LP): 35-250Hz 12dB/octave Butterworth
Infrasonic Filter: on/off selectable, 12dB/octave, -3dB @ 28Hz
Tone Controls Bass: 0dB to +18dB @ 45Hz
Signal Input Low level: 1 RCA pair
Signal Output Low level: 1 RCA pair
Power Input Connector Block
Power Wire Gauge 4 AWG
Speaker Output Connector Screw terminal barrier strip
Speaker Wire Gauge 8 AWG to 18 AWG
Heat Sink Type Cast aluminum
Cooling Convection
Remote Controls Punch Bass EQ (included with cable)
Visual Indicators Power On
Signal Level
Thermal Status
Speaker Protection
Circuit Topology Class Class BD
Frequency Response 20Hz to 20kHz +/- 0.5 dB
Dimensions 2.1 x 11 x 13.7 (in)
5.3 x 27.9 x 34.8 (cm)


I also have a P3002 sitting around. It is about 2 years old, used for about 6 months. It was in the Silverado SS and when it was traded in, it just sits around now. It also works great, looks great, and there isn't a thing wrong with it. It is missing the wire for the bass booster, but I seen that on ebay for like $20 shipped. I gave $300 for this back in the day, but I'll let it go for $150+ shipping.

Rockford Fosgate P3002
Number of Channels 2
Rated Power 75 W x 2 @ 4 Ohms RMS
150 W x 2 @ 2 Ohms RMS
300 W x 1 @ 4 Ohms bridged RMS
Total Power 300 Watts
Bridgeable Yes
Crossover Controls High-Pass (HP): 40-400Hz 12dB/octave Butterworth
Low-Pass (LP): 40-400Hz 12dB/octave Butterworth
Tone Controls Bass: 0dB to +18dB @ 45Hz
Signal Input Low level: 1 RCA pair
Signal Output Low level: 1 RCA pair
Power Input Connector Block
Power Wire Gauge 4 AWG
Speaker Output Connector Screw terminal barrier strip
Speaker Wire Gauge 8 AWG to 18 AWG
Heat Sink Type Cast aluminum
Cooling Convection
Remote Controls Punch Bass EQ (included with cable)
Visual Indicators Power On
Signal Level
Thermal Status
Speaker Protection
Circuit Topology Class Class A/B
Frequency Response 20Hz to 20kHz +/- 0.5 dB
Dimensions 2.4 x 11 x 11.7 (in)
6.1 x 27.9 x 29.7 (cm)

Get ahold of me for info. I don't have pics, because I don't have a digi camera.

Screamin!

TTT! Any offers?