Mark this thread as Unsold
FS: Turbo Parts
01-01-2008, 09:37 PM
#1
New Member
Thread Starter
Join Date: 11-14-07
Location: Channahon, Il
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
FS: Turbo Parts
Name: Anthony O'Brien
Location: Channahon, IL / Decatur, IL
Contact Information: PM on here, AIM SN: ob2524, e-mail: aobrien@millikin.edu
Here is whats for sale:
Garrett/AiResearch/Nissan T3 "60" trim Turbo. .50 a/r compressor, .63 a/r turbine internally gated. The turbo spins freely and shouldn't need a rebuild. When I got the turbo I had it taken apart and cleaned/checked by a member on www.jbody.org (Ken 2.2/Ken 5.7) to see if it needed to be rebuilt and he said it was in good condition. The turbo includes the oil return tube. Asking 150 obo + shipping.
Next is a Ecotec Log manifold. I was told when I bought it that it is stainless steel, This manifold has a T3 flange on it, is set up for an internally gated turbo and has the pressure/heat cuts made in the exhaust side of the flange. Asking 150 obo + shipping.
Next is my front mount intercooler. It is an XS Power intercooler and the size is as follows: 30x6.25x3.5 with 2.5 inch in and out. The couplers you see on the in/out come with the intercooler. Asking 125 obo + shipping.
Next is an authentic HKS SSQV BOV. It is the early gen of the bov and has the ajusting screw on the back of it. It comes with the flange to weld on the charge pipe and gaskets are included. Piece comes with instructions for install from HKS. SOLD
Also up for sale is an ECU from a 2002 5spd Ecotec car. This is a stock ecu and has no tuning modifications. Asking 75 obo + shipping.
Also if anyone wants them are a set of oem Champion Copper SRT-4 spark plugs. I've heard mixed things about using these on an Ecotec motor, some say that they work with no problem and others say that they are too short and shouldnt be used. These are brand new and have never been touched. Asking 10 + shipped.
Last is a brand new in box Greddy profec B spec II boost controller. This comes with everything that it would if purchased from a company new, and has a certificate of authenticity. It is black in color and I will post a picture of it and everything that comes with it tomorrow. Asking 300 obo + shipping.
I am open for trades. Because I am keeping the motor N/A I am looking for a set of Stage II Comp Cams, an LSJ Pacesetter header, or other internal N/A parts. If you have any questions feel free to ask. Thanks for looking.
Location: Channahon, IL / Decatur, IL
Contact Information: PM on here, AIM SN: ob2524, e-mail: aobrien@millikin.edu
Here is whats for sale:
Garrett/AiResearch/Nissan T3 "60" trim Turbo. .50 a/r compressor, .63 a/r turbine internally gated. The turbo spins freely and shouldn't need a rebuild. When I got the turbo I had it taken apart and cleaned/checked by a member on www.jbody.org (Ken 2.2/Ken 5.7) to see if it needed to be rebuilt and he said it was in good condition. The turbo includes the oil return tube. Asking 150 obo + shipping.
Next is a Ecotec Log manifold. I was told when I bought it that it is stainless steel, This manifold has a T3 flange on it, is set up for an internally gated turbo and has the pressure/heat cuts made in the exhaust side of the flange. Asking 150 obo + shipping.
Next is my front mount intercooler. It is an XS Power intercooler and the size is as follows: 30x6.25x3.5 with 2.5 inch in and out. The couplers you see on the in/out come with the intercooler. Asking 125 obo + shipping.
Next is an authentic HKS SSQV BOV. It is the early gen of the bov and has the ajusting screw on the back of it. It comes with the flange to weld on the charge pipe and gaskets are included. Piece comes with instructions for install from HKS. SOLD
Also up for sale is an ECU from a 2002 5spd Ecotec car. This is a stock ecu and has no tuning modifications. Asking 75 obo + shipping.
Also if anyone wants them are a set of oem Champion Copper SRT-4 spark plugs. I've heard mixed things about using these on an Ecotec motor, some say that they work with no problem and others say that they are too short and shouldnt be used. These are brand new and have never been touched. Asking 10 + shipped.
Last is a brand new in box Greddy profec B spec II boost controller. This comes with everything that it would if purchased from a company new, and has a certificate of authenticity. It is black in color and I will post a picture of it and everything that comes with it tomorrow. Asking 300 obo + shipping.
I am open for trades. Because I am keeping the motor N/A I am looking for a set of Stage II Comp Cams, an LSJ Pacesetter header, or other internal N/A parts. If you have any questions feel free to ask. Thanks for looking.
Last edited by anton2586; 01-14-2008 at 08:29 AM. Reason: Item Sold
01-02-2008, 12:21 AM
#3
Senior Member
Join Date: 10-20-07
Location: Fayett-Evil NC
Posts: 675
Likes: 0
Received 0 Likes
on
0 Posts
that log manifold is stainless steel...i can see it in the welds (i am a certified welder) and that is a damn good price for that....if i hadn't already built mine i would be all over that...bump for a deal
01-02-2008, 06:50 PM
#4
New Member
Thread Starter
Join Date: 11-14-07
Location: Channahon, Il
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
SlowBalt 06: Let me know what you want included, i.e. turbo, manifold, bov, intercooler or do you want the boost controller added and what not? The only reason I ask is because the ecu is out of a JBody. Let me know what you want and ill come up with a price for ya. thanks for the interest.
FacelessKhaos: Thanks for the reassurance on the manifold, and thanks for the kind words.
Either way let me know what you want because I will be moving back into school tonight and after tonight I will be working from 8am-5pm central time. Just letting you guys know my work schedule so communications do not get crossed. Thanks again guys.
FacelessKhaos: Thanks for the reassurance on the manifold, and thanks for the kind words.
Either way let me know what you want because I will be moving back into school tonight and after tonight I will be working from 8am-5pm central time. Just letting you guys know my work schedule so communications do not get crossed. Thanks again guys.
01-08-2008, 07:08 PM
#14
New Member
Thread Starter
Join Date: 11-14-07
Location: Channahon, Il
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Rusty: PM sent back.
Here are the pictures of the boost controller, sorry it took me so long to post them.
Picture of the box:
Everything that comes in the box:
The actual boost controller in black:
The certificate of authenticity:
Here are the pictures of the boost controller, sorry it took me so long to post them.
Picture of the box:
Everything that comes in the box:
The actual boost controller in black:
The certificate of authenticity: