Mark this thread as Unsold
FS: Used Comp Cams STG.1 (2.2L.) + OBX Header w/Magnaflow Catted Dp + MSD Tach Driver
#1
Senior Member
Thread Starter
Join Date: 01-05-08
Location: Vancouver, B.C.
Posts: 841
Likes: 0
Received 0 Likes
on
0 Posts
FS: Used Comp Cams STG.1 (2.2L.) + OBX Header/Dp
Pacific Cobalt's 2nd going turbo sale
Now that my garrett turbo kit is installed I have more parts for sale that I don't need anymore.
#1. Used Comp Cams STG.1 (2.2L.) - SOLD!
#2. OBX 4-1 Stainless Mid-Lenght Header w/magnaflow catted Dp - SOLD!
__________________________________________________ ____________________
#1.
For Sale: Used Comp Cams STG.1
Fits: 05-06 Cobalt (2.2L.), 03-05 Cavalier (W/Ecotec 2.2L.), 05-06 Saturn Ion (W/Ecotec 2.2L.)
Location: Vancouver, British Columbia (Canada)
Purchased from: Turbo Tech Racing
Specs:
Approx. 10-12 Whp gains with these cams depending on your other mods. I had CAI, Intake Manifold, Header, Dp, Catback, Light Pulley combined with a Trifecta tune and it was running about 160 WHP
Running them without some form of tuning is not recommended and will cause a C.E.L.
Applications power from 2600-6800rpm
.423 intake and .419 exhaust valve lift, 252 intake and 256 exhaust duration advertized
(210 intake and 212 exhaust @ .050" duration)
Condition: Used
Comp Cams were installed on my car Aug. 12th 2008
Then I went back to stock cams on Nov. 28th 2008 when my garrett turbo kit was installed.
They are in great condition since they were in my car for only a very short time. Oil was changed the next day following the camshaft swap. They were installed professionally by SAS Performance.
http://www.sasperformance.ca/garage.html
Reduced to $200 Including shipping
Canada Post or USPS Regular Ground Shipping with tracking number included.
You won't find many mods that give 12 WHP for $200
These sell for around $450 new plus shipping
Canadian buyers save nearly $100 in taxes/brokeage/fees that payed to get these across the border.
Paypal Only
Pm or e-mail me if you have any questions
Check out my review and videos on Stg.1 cams.
Just click the link below
https://www.cobaltss.net/forums/show...omp+cams+stg.1
SOLD!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!
PICS
Close up Pics
__________________________________________________ ______________________
#2.
For Sale: OBX 4-1 Stainless Mid-Lenght Header + 2 1/4" Downpipe with Magnaflow Metallic Cat Combo
Perfect for someone who does not want to spend too much on a Header/Dp combo.
Fits: Cobalt 2.2 L. not 100% sure about the 2.4L. but it should fit ok according to the many threads on headers around here.
Location: Vancouver, British Columbia (Canada)
Specs: -OBX 4-1 SUS-304 Stainless Mid-Lenght Header, 1 1/2" Primaries, 3" Collector, Exits at 2 1/4"
-Downpipe is a stock LE5 2 1/4" Dp with a Magnaflow Metallic Cat Converter (Part#59955)(2 1/4" IN/OUT) welded for more flow. Combined with my GMPP Touring Catback I had a Full 2 1/4" exaust system all the way back. Just read the 100+ threads about how the 2.2L. should go with 2 1/4" Exhaust systems Well this is it right here.
Condition: Used
-OBX Header Intalled May 6th 2008 in great Condition. No Leaks, No cracks
-Magnaflow Cat was installed September 4th 2008. About 3000 Km on it and I went no more than 10% throttle for the first 850 Km. Broken in properly just look at the pics of how clean it is inside the cat. Very nice deep tone with this combo without the excessive noise and raspy sounds associated with some larger 2.5" Header/Dp combos
I have the gasket that came with the OBX header, never installed it. Also the 2 springs & Bolts that connect the Header to the downpipe have been beefed up with 2 more bolts and 2 larger washers for added strenght and reliability.
Selling for $150 OBO Shipped within Canada (Canada Post GND)
US Members Pm me your Postal Code. I can ship USPS with Tracking#
Paypal Only
Pm or e-mail me if you have any questions
SOLD!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!
PICS
Now that my garrett turbo kit is installed I have more parts for sale that I don't need anymore.
#1. Used Comp Cams STG.1 (2.2L.) - SOLD!
#2. OBX 4-1 Stainless Mid-Lenght Header w/magnaflow catted Dp - SOLD!
__________________________________________________ ____________________
#1.
For Sale: Used Comp Cams STG.1
Fits: 05-06 Cobalt (2.2L.), 03-05 Cavalier (W/Ecotec 2.2L.), 05-06 Saturn Ion (W/Ecotec 2.2L.)
Location: Vancouver, British Columbia (Canada)
Purchased from: Turbo Tech Racing
Specs:
Approx. 10-12 Whp gains with these cams depending on your other mods. I had CAI, Intake Manifold, Header, Dp, Catback, Light Pulley combined with a Trifecta tune and it was running about 160 WHP
Running them without some form of tuning is not recommended and will cause a C.E.L.
Applications power from 2600-6800rpm
.423 intake and .419 exhaust valve lift, 252 intake and 256 exhaust duration advertized
(210 intake and 212 exhaust @ .050" duration)
Condition: Used
Comp Cams were installed on my car Aug. 12th 2008
Then I went back to stock cams on Nov. 28th 2008 when my garrett turbo kit was installed.
They are in great condition since they were in my car for only a very short time. Oil was changed the next day following the camshaft swap. They were installed professionally by SAS Performance.
http://www.sasperformance.ca/garage.html
Reduced to $200 Including shipping
Canada Post or USPS Regular Ground Shipping with tracking number included.
You won't find many mods that give 12 WHP for $200
These sell for around $450 new plus shipping
Canadian buyers save nearly $100 in taxes/brokeage/fees that payed to get these across the border.
Paypal Only
Pm or e-mail me if you have any questions
Check out my review and videos on Stg.1 cams.
Just click the link below
https://www.cobaltss.net/forums/show...omp+cams+stg.1
SOLD!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!
PICS
Close up Pics
__________________________________________________ ______________________
#2.
For Sale: OBX 4-1 Stainless Mid-Lenght Header + 2 1/4" Downpipe with Magnaflow Metallic Cat Combo
Perfect for someone who does not want to spend too much on a Header/Dp combo.
Fits: Cobalt 2.2 L. not 100% sure about the 2.4L. but it should fit ok according to the many threads on headers around here.
Location: Vancouver, British Columbia (Canada)
Specs: -OBX 4-1 SUS-304 Stainless Mid-Lenght Header, 1 1/2" Primaries, 3" Collector, Exits at 2 1/4"
-Downpipe is a stock LE5 2 1/4" Dp with a Magnaflow Metallic Cat Converter (Part#59955)(2 1/4" IN/OUT) welded for more flow. Combined with my GMPP Touring Catback I had a Full 2 1/4" exaust system all the way back. Just read the 100+ threads about how the 2.2L. should go with 2 1/4" Exhaust systems Well this is it right here.
Condition: Used
-OBX Header Intalled May 6th 2008 in great Condition. No Leaks, No cracks
-Magnaflow Cat was installed September 4th 2008. About 3000 Km on it and I went no more than 10% throttle for the first 850 Km. Broken in properly just look at the pics of how clean it is inside the cat. Very nice deep tone with this combo without the excessive noise and raspy sounds associated with some larger 2.5" Header/Dp combos
I have the gasket that came with the OBX header, never installed it. Also the 2 springs & Bolts that connect the Header to the downpipe have been beefed up with 2 more bolts and 2 larger washers for added strenght and reliability.
Selling for $150 OBO Shipped within Canada (Canada Post GND)
US Members Pm me your Postal Code. I can ship USPS with Tracking#
Paypal Only
Pm or e-mail me if you have any questions
SOLD!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!
PICS
Last edited by pacific cobalt; 01-31-2009 at 01:46 AM. Reason: Removed MSD Tach Driver
#5
Senior Member
Thread Starter
Join Date: 01-05-08
Location: Vancouver, B.C.
Posts: 841
Likes: 0
Received 0 Likes
on
0 Posts
#9
New Member
Join Date: 09-02-07
Location: your house.
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
Header still available? Anyone with a 2.4 have this header? Will it bolt up to the cobalt addiction 2.5"? As i just got that downpipe this year and just really need the header, but will buy both.
#10
Senior Member
Thread Starter
Join Date: 01-05-08
Location: Vancouver, B.C.
Posts: 841
Likes: 0
Received 0 Likes
on
0 Posts
#15
Senior Member
Thread Starter
Join Date: 01-05-08
Location: Vancouver, B.C.
Posts: 841
Likes: 0
Received 0 Likes
on
0 Posts
BUMP
STG. 1 Competition Cams for the 2.2L. are still for Sale
$225 Shipped
Canada Post or USPS Regular Ground Shipping with tracking number included.
STG. 1 Competition Cams for the 2.2L. are still for Sale
$225 Shipped
Canada Post or USPS Regular Ground Shipping with tracking number included.
#17
Senior Member
Thread Starter
Join Date: 01-05-08
Location: Vancouver, B.C.
Posts: 841
Likes: 0
Received 0 Likes
on
0 Posts
Yeah these sell brand new for $459 + cost of shipping so I figured 3 months use on them I'll knock off just over 1/2 the price and sell them at $225 including shipping.
You can't buy many things that add 10-12 WHP for that much doe
#19
Senior Member
Thread Starter
Join Date: 01-05-08
Location: Vancouver, B.C.
Posts: 841
Likes: 0
Received 0 Likes
on
0 Posts
#21
Senior Member
Thread Starter
Join Date: 01-05-08
Location: Vancouver, B.C.
Posts: 841
Likes: 0
Received 0 Likes
on
0 Posts
Saturday BUMP
Comp Cams 2.2L. are still for sale
$225 Shipped Canada or US
Comp Cams 2.2L. are still for sale
$225 Shipped Canada or US
Last edited by pacific cobalt; 12-06-2008 at 04:17 PM. Reason: added price
#24
Senior Member
Thread Starter
Join Date: 01-05-08
Location: Vancouver, B.C.
Posts: 841
Likes: 0
Received 0 Likes
on
0 Posts
Price Reduced on the 2.2 cams
$220 Shipped
BUMP
Note:
Comp Cams are for 05 and 06 ecotec 2.2L. models only. The later 07 ecotec 2.2 has a cam sensor that would require custom fabrication.
$220 Shipped
BUMP
Note:
Comp Cams are for 05 and 06 ecotec 2.2L. models only. The later 07 ecotec 2.2 has a cam sensor that would require custom fabrication.
Last edited by pacific cobalt; 12-09-2008 at 08:37 PM. Reason: Added Note