Mark this thread as Unsold
FS: ZZP 2.2/2.4 supercharger kit, spare m62, pulley, hub
01-03-2017, 06:55 PM
#27
New Member
Join Date: 01-03-17
Location: Shepherdstown WV
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Just my luck, I ordered the complete ZZP kit a few days ago. I still need the M62 though, their kit doesn't come with one.
I'm interested in the S/C if you still have it. The plugged sensor port shouldn't be a problem to reverse. If I cant do that , I probably have no business attempting this mod to begin with. Pretty sure I'll need it for the LE 5
I'm interested in the S/C if you still have it. The plugged sensor port shouldn't be a problem to reverse. If I cant do that , I probably have no business attempting this mod to begin with. Pretty sure I'll need it for the LE 5
01-04-2017, 10:24 PM
#28
Senior Member
Thread Starter
Just my luck, I ordered the complete ZZP kit a few days ago. I still need the M62 though, their kit doesn't come with one.
I'm interested in the S/C if you still have it. The plugged sensor port shouldn't be a problem to reverse. If I cant do that , I probably have no business attempting this mod to begin with. Pretty sure I'll need it for the LE 5
I'm interested in the S/C if you still have it. The plugged sensor port shouldn't be a problem to reverse. If I cant do that , I probably have no business attempting this mod to begin with. Pretty sure I'll need it for the LE 5
01-05-2017, 04:23 PM
#29
New Member
Join Date: 01-03-17
Location: Shepherdstown WV
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
That's good to know. Haven't gotten into the wiring research yet, that's the part I dread the most. This is my first daily driver or street legal build, all of that will be a bit more complicated than I'm used to. I'll get it worked out though.
Shoot me a PM, lets get this deal done.
Shoot me a PM, lets get this deal done.
01-12-2017, 11:17 PM
#34
New Member
Pulley
First up is a ZZP supercharger kit for the 2.2/2.4. Kit was purchased new and was only used for appx 1k miles. Blower, lsj throttle body, and manifold were purchased used with appx 70k on them. Kit comes complete with everything listed on the zzp site.....I made a harness for the I/c pump to make it easier for install....I also used the LSJ intercooler pump bracket and hoses instead of the stuff zzp sent. Kit comes with 60lbs injectors, 3.1 pulley. Only things you will need are a tune and some colder spark plugs.
Asking 1000 o.b.o....plus shipping. Due to all the stuff there will probably be 2 or 3 boxes being sent.
Next up is an M62. bought this as a spare to polish...got about half way through and lost interest. There is no oil in this one, so you will need oil. SCIP port has also been tapped and plugged since the 2.2 doesn't use that sensor. Does already have a ZZP modular hub on it...can include a pulley for the right price. I have never run this blower, but everything appears to be in good condition.
asking 125 o.b.o. plus shipping
Next up is a zzp 2.9 pulley.......SOLD
Hub and pulley 35 shipped........hub and 2.8 SOLD
pulley 20 shipped
Any questions feel free to shoot me a message.
Asking 1000 o.b.o....plus shipping. Due to all the stuff there will probably be 2 or 3 boxes being sent.
Next up is an M62. bought this as a spare to polish...got about half way through and lost interest. There is no oil in this one, so you will need oil. SCIP port has also been tapped and plugged since the 2.2 doesn't use that sensor. Does already have a ZZP modular hub on it...can include a pulley for the right price. I have never run this blower, but everything appears to be in good condition.
asking 125 o.b.o. plus shipping
Next up is a zzp 2.9 pulley.......SOLD
Hub and pulley 35 shipped........hub and 2.8 SOLD
pulley 20 shipped
Any questions feel free to shoot me a message.
01-26-2017, 11:14 AM
#40
Senior Member
Thread Starter
01-26-2017, 11:20 AM
#41
New Member
I would like to buy it, just curious how much boost 3.1 pulley pushes? I figure it's around 8 psi which is perfect for me I don't Wana blow the stock 2.4 motor so I don't Wana run over like 12 psi. I will keep you updated because like I said I gotta wait on income tax returns for the $$$$ to pay for the kit.
01-26-2017, 05:56 PM
#42
Senior Member
Thread Starter
I would like to buy it, just curious how much boost 3.1 pulley pushes? I figure it's around 8 psi which is perfect for me I don't Wana blow the stock 2.4 motor so I don't Wana run over like 12 psi. I will keep you updated because like I said I gotta wait on income tax returns for the $$$$ to pay for the kit.
It will make it fun for sure. Just let me know
02-12-2017, 11:24 AM
#49
Senior Member
Thread Starter
