Mark this thread as Unsold
For Sale nitrous sc parts dp header pulley etc
04-13-2010, 12:06 AM
#1
Junior Member
Thread Starter
Join Date: 07-17-08
Location: Nevada
Posts: 470
Likes: 0
Received 0 Likes
on
0 Posts
nitrous sc parts dp header pulley etc
First off all prices are obo, I am willing to work with anyone. So just ask and i will do my best to make a deal.Easiest and fastest way to get a hold of me txt 7757774480 added new parts wot box lc only 100 shipped also 60# injectors 1000 miles 150 shipped
1) Projector with built in dvd player payed 1000, bulb is burnt out. works great minus bulb 350 plus shipping.
2) Stock headlights 115 plus shipping
3) stock gauge pillar 35 plus shipping sorry its dirty good shape
4) stock boost gauge 30 plus shipping / a/f gauge 20 plus shipping
5) stock header/dp/muffler and piping 200 plus shipping
6) stage 2 pulley 30 shipped can send pics forgot to take pic
7) mass wheels 18 inch tires not included, one rim minor scuff 400 plus shipping
8) nitrous setup same one ottp sells for 400. Mine includes zex dual purge, msd window switch, and lean cut off gauge can read tps narrow and wideband. Also 2 fogger nozzles, and multiple nozzles.
9) venom intake manifold for honda d16 600 new 300 shipped
All prices are obo!!!!!!!!
1) Projector with built in dvd player payed 1000, bulb is burnt out. works great minus bulb 350 plus shipping.
2) Stock headlights 115 plus shipping
3) stock gauge pillar 35 plus shipping sorry its dirty good shape
4) stock boost gauge 30 plus shipping / a/f gauge 20 plus shipping
5) stock header/dp/muffler and piping 200 plus shipping
6) stage 2 pulley 30 shipped can send pics forgot to take pic
7) mass wheels 18 inch tires not included, one rim minor scuff 400 plus shipping
8) nitrous setup same one ottp sells for 400. Mine includes zex dual purge, msd window switch, and lean cut off gauge can read tps narrow and wideband. Also 2 fogger nozzles, and multiple nozzles.
9) venom intake manifold for honda d16 600 new 300 shipped
All prices are obo!!!!!!!!
Last edited by Durtyss; 06-15-2010 at 02:39 AM.
04-14-2010, 09:10 PM
#7
Senior Member
how much just dp shipped to 98466... also you might want to adjust the price of the headlights you can buy them everywhere for about 60 shipped... I was just offered 40 plus shipping today on a set that I am going to swoop to paint
04-14-2010, 09:33 PM
#8
Junior Member
Thread Starter
Join Date: 07-17-08
Location: Nevada
Posts: 470
Likes: 0
Received 0 Likes
on
0 Posts
I'm on my phone when I get on my pc ill figure ship. As far as headlighs go I searched headlights for sale then averaged. Also it says in giant bold letters, obo
04-14-2010, 10:09 PM
#9
New Member
Join Date: 03-28-10
Location: Canada
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
got this off ottp
This kit is made for the Cobalt and Ion, but will work on any Ecotec engine. It comes with everything to install and is fully adjustable from 35 to 75hp. The following parts are included: >10lb bottle with high flow valve >4AN stainless bottle nut & Teflon washer >Stainless quick connect Bottle brackets and hardware >Liquid filled bottle pressure guage >16 foot braided stainless feed line, blue fittings >High Flow Nitrous and Fuel solenoids >Solenoid mounting bracket >2 foot Braided stainless Nitrous and Fuel feed lines, red and blue fittings >Braided stainless line for Fuel rail test port installation, red fitting >Jets for 35, 50 and 75HP >High flow Tomahawk Wet Nozzle (1/16 NPT) >Wet Nozzle Mounting adaptor so the Nozzle does not blow out during injection causing a fire, makes mounting the nozzle in plastic or rubber a snap! >Lighted arming switch, relay, wire and wire harness, fuse, crimp terminals etc.. >Micro throttle activation switch and mounting bracket >Our 22 page Nitrous installation and tuning book is included! Full pictures and detailed installation instructions. Stainless steel components are standard on all DynoTune Nitrous kits, not plastic or brass. This DynoTune Nitrous kit is tuned for a safe reliable Horsepower increase. More and more folks are switching to DynoTune products due to the price, Performance, innovation and support you will get with no other Manufacturer. Isnt it time you made the switch?
This kit is made for the Cobalt and Ion, but will work on any Ecotec engine. It comes with everything to install and is fully adjustable from 35 to 75hp. The following parts are included: >10lb bottle with high flow valve >4AN stainless bottle nut & Teflon washer >Stainless quick connect Bottle brackets and hardware >Liquid filled bottle pressure guage >16 foot braided stainless feed line, blue fittings >High Flow Nitrous and Fuel solenoids >Solenoid mounting bracket >2 foot Braided stainless Nitrous and Fuel feed lines, red and blue fittings >Braided stainless line for Fuel rail test port installation, red fitting >Jets for 35, 50 and 75HP >High flow Tomahawk Wet Nozzle (1/16 NPT) >Wet Nozzle Mounting adaptor so the Nozzle does not blow out during injection causing a fire, makes mounting the nozzle in plastic or rubber a snap! >Lighted arming switch, relay, wire and wire harness, fuse, crimp terminals etc.. >Micro throttle activation switch and mounting bracket >Our 22 page Nitrous installation and tuning book is included! Full pictures and detailed installation instructions. Stainless steel components are standard on all DynoTune Nitrous kits, not plastic or brass. This DynoTune Nitrous kit is tuned for a safe reliable Horsepower increase. More and more folks are switching to DynoTune products due to the price, Performance, innovation and support you will get with no other Manufacturer. Isnt it time you made the switch?
06-15-2010, 03:02 AM
#18
Junior Member
Thread Starter
Join Date: 07-17-08
Location: Nevada
Posts: 470
Likes: 0
Received 0 Likes
on
0 Posts
Same as ottp kit 400 shipped includes many nozzles pressure gauge extra fogger nozzle that's 150 in extras. Or 500 shipped with dual zex purge, msd window switch and lean cut off gauge that's 500 in extras.