For Sale Supercharger and J body part out
03-07-2012, 01:40 PM
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: 06-29-10
Location: NH
Posts: 1,167
Likes: 0
Received 0 Likes
on
0 Posts
Supercharger and J body part out
Here's basically everything that was on my car and/or supposed to be on my car but never made it. Prices are best offer and what actually comes in the supercharger kit is flex-able. I will ship anything anywhere but you will be paying for it, anything that will fit in a usps priority box will be shipped that way, larger items will be shipped ups (unless you're in canada then they will be shipped usps). They will be insured for their value and have delivery confirmation. Shipping prices will be calculated on a per sale basis, prices shown do not include shipping.
Supercharger Kit Full setup $2,200
Here is an complete super charger setup, it includes the following and can be ordered any way you like.
m62 blower
2.8" smooth flow pulley installed comes with stock as well
custom jbody TB adapter plate
stock intake manifold (currently has zzp dual pass installed, will come with stock plate as well)
SS idler pulley
SS tensioner setup (and spare pulley)
SS alternator
stage 2 belt with 1 rib cut off, no slippage problems on the 2.8 up to 7200 (never went higher so cant comment up there)
SS upper coolant hose anti abrasion covering, does not include the hose (buy one at CED)
NGK 2 step colder plugs with about 1k miles on them
60lb injectors with 3 spare clips
map and injector swap harness for j body
SC to mani gasket
mani to head gasket modified for l61
OEM "modified" phenolic spacer designed for l61/le5 setups with gasket
biggest k&n filter that would fit in a j body (should get cleaned, cosmetically damaged)
CX racing heat exchanger
HE pump, with very good locking connector and custom bracket
"option b" coolant tank that I was using as flow through setup until I could make a flow through tank, never got around to it
all the required install hardware for l61, le5, lap if I can find it it will come with the shoulder bolts for the mani to head
all required hoses, heck even a little extra and a ton of hose clamps
rtv copper because I got it with the kit too
If 02 j-body, will come with base tune designed for what you buy
Any other car will get in-depth tuning support if requested
Fuel pressure regulator setup
AEM FPR $100
02 j-body FPR adapter $50
4 foot Russel AN-6 lines (x2) $25 each
Prosport Fuel pressure gauge $25
Battery Relocate kit $100
Includes
Sealed box, with vent
0 gauge wire and connectors setup for j-body should also fit delta and others
metal NHRA/IHRA cut off switch
fuel or spark cutting relay (required for NHRA, not wired in)
"Jump terminal" just a spot to bolt the stock positive wire to to secure it and give under hood jump point
tons of random extras
j body l61 engine mounts SOLD
TTR upper $75
TTR j-body lower $25
Prothane j-body f23 tranny mounts brand new $50
F23 OBX Diff $250
Brand new, un-opened includes the obx fix kit, will install fix kit for extra.
Handling Parts
Tein SSP coil overs include original instructions and tools (~10k miles) $900 SOLD!
Addco 1" sold rear sway bar (~3k miles) $90
j-body saturn rear sway kit, only 1/4" thick rear swap in existence. comes with everything but hub to axle bolts (10mmx1.5x50mm), little bit rusty, everything has ~3k miles, comes with autopart international rotors and EBC red pads $250
Russel stainless brake bleeders (x2) $10 each
Used stock rear hub, abs cover is cracked and repaired, abs still works $15
New j-body Prothane Front control arm bushings (graphite) $50
New j-body MOOG hard plastic front sway bar endlinks $15
Blizzak WS60 195/60R16 snow tires on 16x6.5 steel wheels 5x100/114.5 $450
Have about 6k miles on them, 1 pair has 3 2nd gear clutch dump burnouts and the other has 6 dyno pulls at least 1 more if not 2 more winters left on them at this rate. 1 wheel might be missing a wheel weight as there is a vibration over 85mph.
Yes I will ship them, yes it will cost quite a bit
I also have a broken F23 j-body tranny that I'd take $50 for. Just needs new shift forks.
Thats it, I prefer paypay, but will take MO, just beware that your parts wont ship till I get that MO and deposit it.
Supercharger Kit Full setup $2,200
Here is an complete super charger setup, it includes the following and can be ordered any way you like.
m62 blower
2.8" smooth flow pulley installed comes with stock as well
custom jbody TB adapter plate
stock intake manifold (currently has zzp dual pass installed, will come with stock plate as well)
SS idler pulley
SS tensioner setup (and spare pulley)
SS alternator
stage 2 belt with 1 rib cut off, no slippage problems on the 2.8 up to 7200 (never went higher so cant comment up there)
SS upper coolant hose anti abrasion covering, does not include the hose (buy one at CED)
NGK 2 step colder plugs with about 1k miles on them
60lb injectors with 3 spare clips
map and injector swap harness for j body
SC to mani gasket
mani to head gasket modified for l61
OEM "modified" phenolic spacer designed for l61/le5 setups with gasket
biggest k&n filter that would fit in a j body (should get cleaned, cosmetically damaged)
CX racing heat exchanger
HE pump, with very good locking connector and custom bracket
"option b" coolant tank that I was using as flow through setup until I could make a flow through tank, never got around to it
all the required install hardware for l61, le5, lap if I can find it it will come with the shoulder bolts for the mani to head
all required hoses, heck even a little extra and a ton of hose clamps
rtv copper because I got it with the kit too
If 02 j-body, will come with base tune designed for what you buy
Any other car will get in-depth tuning support if requested
Fuel pressure regulator setup
AEM FPR $100
02 j-body FPR adapter $50
4 foot Russel AN-6 lines (x2) $25 each
Prosport Fuel pressure gauge $25
Battery Relocate kit $100
Includes
Sealed box, with vent
0 gauge wire and connectors setup for j-body should also fit delta and others
metal NHRA/IHRA cut off switch
fuel or spark cutting relay (required for NHRA, not wired in)
"Jump terminal" just a spot to bolt the stock positive wire to to secure it and give under hood jump point
tons of random extras
j body l61 engine mounts SOLD
TTR upper $75
TTR j-body lower $25
Prothane j-body f23 tranny mounts brand new $50
F23 OBX Diff $250
Brand new, un-opened includes the obx fix kit, will install fix kit for extra.
Handling Parts
Tein SSP coil overs include original instructions and tools (~10k miles) $900 SOLD!
Addco 1" sold rear sway bar (~3k miles) $90
j-body saturn rear sway kit, only 1/4" thick rear swap in existence. comes with everything but hub to axle bolts (10mmx1.5x50mm), little bit rusty, everything has ~3k miles, comes with autopart international rotors and EBC red pads $250
Russel stainless brake bleeders (x2) $10 each
Used stock rear hub, abs cover is cracked and repaired, abs still works $15
New j-body Prothane Front control arm bushings (graphite) $50
New j-body MOOG hard plastic front sway bar endlinks $15
Blizzak WS60 195/60R16 snow tires on 16x6.5 steel wheels 5x100/114.5 $450
Have about 6k miles on them, 1 pair has 3 2nd gear clutch dump burnouts and the other has 6 dyno pulls at least 1 more if not 2 more winters left on them at this rate. 1 wheel might be missing a wheel weight as there is a vibration over 85mph.
Yes I will ship them, yes it will cost quite a bit
I also have a broken F23 j-body tranny that I'd take $50 for. Just needs new shift forks.
Thats it, I prefer paypay, but will take MO, just beware that your parts wont ship till I get that MO and deposit it.
Last edited by Leafydialupking; 03-11-2012 at 12:14 PM.
Thread
Thread Starter
Forum
Replies
Last Post