Mark this thread as Unsold
supercharger kit for sale local area.
09-04-2009, 04:29 PM
#1
Senior Member
Thread Starter
iTrader: (5)
Join Date: 04-23-08
Posts: 4,232
Likes: 0
Received 0 Likes
on
0 Posts
supercharger kit for sale local area/or not local
**----SOLD TO GI.JOE.G5----**
so i have my setup for sale.
have some different plans for my car...so i will be parting with it.
kit includes :
eaton m62 supercharger. (rotors, gears, and coupler inside came off a wrecked redline with 3k miles).
stock pulley, and 4 bolt hub, with a 2.8" pulley on it
stage 2 belt
42# injectors with harness that plugs right into the 2.2 car
pulley tensioner and idler pulley
lsj manifold (sprayed painted with black heat paint)
lower intake manifold mount and bolt
bosch pump, and pump bracket
cobra heat exchanger
lsj heat exchanger
dual pass
injen intake
option b tank
every gasket needed
all the hoses i used.
all the bolts
lsj throttle body
pretty much everything under the hood required to supercharge a car
not going to ship this stuff.
i will be needing the 2.2 manifold, tensioner, belt, stock airbox, stock injectors and harness... and pretty much the stuff to make my car stock again within the same day because my car is my daily driver.
---update----i may be buying the stock parts so i will be able to prolly ship it now.
1500(x3% for paypal fees) with the understanding that I will do the install for you...i can knock it out in a day, and that i get the parts in return.
Haza Newman
5127398304
I am willing to drive to do this install...because I live in an apartment and def do not have the space for it.
I only have minors tools, so a drill and bits and stuff will be needed.
for rules sake....pics
https://www.cobaltss.net/forums/forced-induction-50/supercharging-my-2-2-tomorrow-148202/
go to my build for pics...
so i have my setup for sale.
have some different plans for my car...so i will be parting with it.
kit includes :
eaton m62 supercharger. (rotors, gears, and coupler inside came off a wrecked redline with 3k miles).
stock pulley, and 4 bolt hub, with a 2.8" pulley on it
stage 2 belt
42# injectors with harness that plugs right into the 2.2 car
pulley tensioner and idler pulley
lsj manifold (sprayed painted with black heat paint)
lower intake manifold mount and bolt
bosch pump, and pump bracket
cobra heat exchanger
lsj heat exchanger
dual pass
injen intake
option b tank
every gasket needed
all the hoses i used.
all the bolts
lsj throttle body
pretty much everything under the hood required to supercharge a car
not going to ship this stuff.
i will be needing the 2.2 manifold, tensioner, belt, stock airbox, stock injectors and harness... and pretty much the stuff to make my car stock again within the same day because my car is my daily driver.
---update----i may be buying the stock parts so i will be able to prolly ship it now.
1500(x3% for paypal fees) with the understanding that I will do the install for you...i can knock it out in a day, and that i get the parts in return.
Haza Newman
5127398304
I am willing to drive to do this install...because I live in an apartment and def do not have the space for it.
I only have minors tools, so a drill and bits and stuff will be needed.
for rules sake....pics
https://www.cobaltss.net/forums/forced-induction-50/supercharging-my-2-2-tomorrow-148202/
go to my build for pics...
Last edited by ei3dag3; 09-18-2009 at 10:00 AM.
09-04-2009, 04:56 PM
#4
Senior Member
Thread Starter
iTrader: (5)
Join Date: 04-23-08
Posts: 4,232
Likes: 0
Received 0 Likes
on
0 Posts
i've got some bigger plans man, just wait 
haha hey hey, when you see what i'm gonna do you're gonna be like that was a good idea
haha hey hey, when you see what i'm gonna do you're gonna be like that was a good idea
Last edited by ei3dag3; 09-04-2009 at 04:56 PM. Reason: Automerged Doublepost
09-05-2009, 12:39 PM
#9
Senior Member
Thread Starter
iTrader: (5)
Join Date: 04-23-08
Posts: 4,232
Likes: 0
Received 0 Likes
on
0 Posts
when is payday? 
huntington is about 5 hours away, i wouldn't mind driving to ya if you paid for my gas :P
leave on a friday mid afternoon. then could start early on morning...say 8 am or so.
then be done.
huntington is about 5 hours away, i wouldn't mind driving to ya if you paid for my gas :P
leave on a friday mid afternoon. then could start early on morning...say 8 am or so.
then be done.
09-05-2009, 02:26 PM
#11
Senior Member
Thread Starter
iTrader: (5)
Join Date: 04-23-08
Posts: 4,232
Likes: 0
Received 0 Likes
on
0 Posts
sale no longer pending.
pms replied.
sorry about my inbox being full guys, got a few emails from css.net that i had gotten pms but it was full.
i guess my premium membership has now expired, but i prolly won't redo since this site always goes down.
anyways , if you tried to get ahold me, i cleared my pms so resend.
also if it says my pm is full in the future just email me...
interviewatruins@gmail.com
pms replied.
sorry about my inbox being full guys, got a few emails from css.net that i had gotten pms but it was full.
i guess my premium membership has now expired, but i prolly won't redo since this site always goes down.
anyways , if you tried to get ahold me, i cleared my pms so resend.
also if it says my pm is full in the future just email me...
interviewatruins@gmail.com
Last edited by ei3dag3; 09-05-2009 at 02:26 PM. Reason: Automerged Doublepost
09-05-2009, 06:53 PM
#12
Senior Member
Great deal...too bad you are so far south from me. I'd pay you in a heartbeat especially if you'd help install. I have all stock parts you'd want to.
Obviously the car would need to be tuned after install, but could it be driven just a short distance at low RPM's to get from point a to point b? I ask because I am considering going this route and if I get it installed, but my Trifecta hasn't arrived in the mail, would I be able to drive it just to get it home (it would be a one way trip less than 20 miles on 45mph or slower roads).
Obviously the car would need to be tuned after install, but could it be driven just a short distance at low RPM's to get from point a to point b? I ask because I am considering going this route and if I get it installed, but my Trifecta hasn't arrived in the mail, would I be able to drive it just to get it home (it would be a one way trip less than 20 miles on 45mph or slower roads).
09-05-2009, 08:32 PM
#13
Senior Member
Thread Starter
iTrader: (5)
Join Date: 04-23-08
Posts: 4,232
Likes: 0
Received 0 Likes
on
0 Posts
darn, too bad you're not closer.
but yes sir you can.
the tune stays the same when you're not at WOT (wide open throttle).
the only part vince changes are the tables at wot.
but if you were worried you could actually cap the bypass actuator instead of leaving it open, and limit boost from occuring so that way even when you floor it there is not boost.
(a boost gauge will read like 3 psi, but vince said he saw no boost until i took the cap i put on there was off)
heres what i mean.
if you were willing to ship me the stuff i need first, i would maybe consider shipping it out. as my car is my dd, i'm not sure if yours is the same.
the main thing is i wanted to help out with install and answer any questions while there since i know how to do it really quickly.
someone should fly me out if they're not local so i can go on a trip :P:P
but yes sir you can.
the tune stays the same when you're not at WOT (wide open throttle).
the only part vince changes are the tables at wot.
but if you were worried you could actually cap the bypass actuator instead of leaving it open, and limit boost from occuring so that way even when you floor it there is not boost.
(a boost gauge will read like 3 psi, but vince said he saw no boost until i took the cap i put on there was off)
heres what i mean.
if you were willing to ship me the stuff i need first, i would maybe consider shipping it out. as my car is my dd, i'm not sure if yours is the same.
the main thing is i wanted to help out with install and answer any questions while there since i know how to do it really quickly.
someone should fly me out if they're not local so i can go on a trip :P:P
09-05-2009, 08:57 PM
#14
Senior Member
Unfortunately I can't afford to do that, I'd have to rent a car for a while to do so as mine is my DD as well.
I'll tell you what, if this doesn't sell in the next month or two, I may have to fly you out and have you install it. LOL.
I'll tell you what, if this doesn't sell in the next month or two, I may have to fly you out and have you install it. LOL.
09-05-2009, 08:58 PM
#15
Senior Member
Thread Starter
iTrader: (5)
Join Date: 04-23-08
Posts: 4,232
Likes: 0
Received 0 Likes
on
0 Posts
i just called my buddy jn2 and asked him how much he wanted for those parts...cause he apparently has them.
we'll see
, any other people out there?i guess i changed my mind and might be willing to ship as long as buyer pays for it.
09-06-2009, 07:43 AM
#16
Senior Member
Thread Starter
iTrader: (5)
Join Date: 04-23-08
Posts: 4,232
Likes: 0
Received 0 Likes
on
0 Posts
i looked up flights for october
i set it up on priceline for a sunday, and then back on monday
from austin, to coon rapids
says 218 for a round trip with american airlines..not too shabby
i wonder if i could get those parts put on the airplane for a price...could save on shipping, and i'd be willing to pay for part of the plane ticket as well.
this weekend would have been perfect for labor day :p
oh well haha
Last edited by ei3dag3; 09-06-2009 at 07:53 AM. Reason: Automerged Doublepost
09-07-2009, 10:48 PM
#23
Senior Member
Join Date: 05-26-09
Location: Cali
Posts: 1,057
Likes: 0
Received 0 Likes
on
0 Posts
Hey interview that is an awesome deal man. And I live in socal!! But I won't have that
money till next month. Damn. And I have a garage and everything.!
Bump for a good deal!!
Hey interview that is an awesome deal man. And I live in socal!! But I won't have that
money till next month. Damn. And I have a garage and everything.!
Bump for a good deal!!
money till next month. Damn. And I have a garage and everything.!
Bump for a good deal!!
Hey interview that is an awesome deal man. And I live in socal!! But I won't have that
money till next month. Damn. And I have a garage and everything.!
Bump for a good deal!!
Last edited by Fonzi1289; 09-07-2009 at 10:48 PM. Reason: Automerged Doublepost
09-07-2009, 10:54 PM
#24
Senior Member
Thread Starter
iTrader: (5)
Join Date: 04-23-08
Posts: 4,232
Likes: 0
Received 0 Likes
on
0 Posts
Hey interview that is an awesome deal man. And I live in socal!! But I won't have that
money till next month. Damn. And I have a garage and everything.!
Bump for a good deal!!
Hey interview that is an awesome deal man. And I live in socal!! But I won't have that
money till next month. Damn. And I have a garage and everything.!
Bump for a good deal!!
money till next month. Damn. And I have a garage and everything.!
Bump for a good deal!!
Hey interview that is an awesome deal man. And I live in socal!! But I won't have that
money till next month. Damn. And I have a garage and everything.!
Bump for a good deal!!
damn, well it may still be around by then. lol.
hard to tell.