Mark this thread as Unsold
yellowshowbalts supercharger kit
#1
Senior Member
Thread Starter
yellowshowbalts supercharger kit
yellowshowbalts supercharger kit.
--------------------------------------------------------------------------------
ok here is what you will get for 2000.00 plus shiping obo..
air fuel gauge, boost gauge, supercharger, with extra case, intake, all brackets, and bolts, with stage2 pully and injectors, and stock pully with stock belt and stage 2 belt, a 2 bar map sensor, with wide band o2 sensor and software, smt-7 piggy back system for tunning, gaskets, C6 corvette intercooler, and high flow intercooler pump with hoses and wiring, all systems have the complete wiring with quick connects,allso you will be getting the gm-pully puller to go with it.
and heres the pics o everything that you will be getting.....
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
im willing to seperate but only a few things like wideban o2 system, smt-7 piggyback.
200.00 for the wideban with new sensor, 325.00 for the piggyback,
ps. i gave "dsm4life" 5 weeks to pay me for this and he still hasent.. so its back up for sale.. paypal only send to "my4muddytires@insightbb.com"
and heres a few more pics....
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
--------------------------------------------------------------------------------
ok here is what you will get for 2000.00 plus shiping obo..
air fuel gauge, boost gauge, supercharger, with extra case, intake, all brackets, and bolts, with stage2 pully and injectors, and stock pully with stock belt and stage 2 belt, a 2 bar map sensor, with wide band o2 sensor and software, smt-7 piggy back system for tunning, gaskets, C6 corvette intercooler, and high flow intercooler pump with hoses and wiring, all systems have the complete wiring with quick connects,allso you will be getting the gm-pully puller to go with it.
and heres the pics o everything that you will be getting.....
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
im willing to seperate but only a few things like wideban o2 system, smt-7 piggyback.
200.00 for the wideban with new sensor, 325.00 for the piggyback,
ps. i gave "dsm4life" 5 weeks to pay me for this and he still hasent.. so its back up for sale.. paypal only send to "my4muddytires@insightbb.com"
and heres a few more pics....
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
Last edited by yellowshowbalt; 04-21-2008 at 12:12 PM. Reason: Automerged Doublepost
#6
Senior Member
Thread Starter
it will work with any 2.0,2.2 or 2.4 auto or manual.. ive been running this system for over 9mo and 25000 miles later.. it still runs great im selling this so i can buy this house im trying to get...
everything is in perfect shape with new bearings in the scer even the extra case has new bearing in it. i was making 15psi of boost on a stock, 06 LS 2.2 manual base model car.. with only a full exhaust system and cold air intake... go to youtube and look up vids under my name these are half throtle pulls becouse i wanted to break in the car a little...now im back to stock and the car is slow again...
everything is in perfect shape with new bearings in the scer even the extra case has new bearing in it. i was making 15psi of boost on a stock, 06 LS 2.2 manual base model car.. with only a full exhaust system and cold air intake... go to youtube and look up vids under my name these are half throtle pulls becouse i wanted to break in the car a little...now im back to stock and the car is slow again...
#11
Senior Member
Thread Starter
becouse i guted the cat and the rear o2 sensor was fliping out...
the wide ban is a innovate motorsports LC-1
this is the best pic that i have of it.you can use a laptop with or without a gauge.make it 225.00 and ill throw in the gauge too..
[IMG][/IMG]
the wide ban is a innovate motorsports LC-1
this is the best pic that i have of it.you can use a laptop with or without a gauge.make it 225.00 and ill throw in the gauge too..
[IMG][/IMG]
#19
Senior Member
Thread Starter
thats why there is another case to go with it, look at the pics, and its not heat warped, its oil and dirt
i just went and checked it to make sure it all wipes off with a rag and your finger.. i wouldent try to sell crap... i cut the hole bottom out of it to lower my iat temps and scrub off 2-3 psi of boost and it worked great....... besides when i did that i was running no tunning at all not even the smt-7 was on there . if theres a problem with this statment take it up with me..... besides i can just as eazyly put it back on and smoke just about any of ya with this setup..... no joke...
i just went and checked it to make sure it all wipes off with a rag and your finger.. i wouldent try to sell crap... i cut the hole bottom out of it to lower my iat temps and scrub off 2-3 psi of boost and it worked great....... besides when i did that i was running no tunning at all not even the smt-7 was on there . if theres a problem with this statment take it up with me..... besides i can just as eazyly put it back on and smoke just about any of ya with this setup..... no joke...
#22
Senior Member
Thread Starter
i used a diegrinder, i made 2 tb plates the first on out of t6 aluminum 5/8 in thick then i found that was over kill ... the second one i made out of t6 aluminum 1/8 in thick and and drilled 4 holes for the mounting to the sc then i just bored out the bolt holes on my stock 2.2 tb and ported it all to match and made a gasket out of gasket maker materal
aka kellogs cerial box....no leaks and it was fine..
heres pics of the one i was useing on my setup...
[IMG][/IMG]
[IMG][/IMG]
i left the stock gasket on the sc and used the plate i made with my gasket on the other side and got some longer bolts from the hardware store..
aka kellogs cerial box....no leaks and it was fine..
heres pics of the one i was useing on my setup...
[IMG][/IMG]
[IMG][/IMG]
i left the stock gasket on the sc and used the plate i made with my gasket on the other side and got some longer bolts from the hardware store..
Last edited by yellowshowbalt; 04-21-2008 at 10:36 PM.
#24
Senior Member
Thread Starter
after work bump...... ill do 1500.00 + shiping for the sc and manafold with all brackets and pullys. but no stage 2 stuff....and no intercooler, no pump, no smt-7, and no wideband o2,no gauges, no pully puller, or 2000.00+shiping and you get everything... the smt-7 will work on any car for turbo or not...