Official Base Model Thread
#6102
New Member
Join Date: 11-18-11
Location: victorville, ca
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
I have an 05 base model....no power nothing.....2.2L L61 motor......dressing up the inside then I'm gonna start modding the motor
Sent from my Galaxy Nexus using IB AutoGroup
Sent from my Galaxy Nexus using IB AutoGroup
#6103
Member
iTrader: (1)
Join Date: 01-30-11
Location: Wisconsin
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
I had a stock belt on my 3.1 and it was gettin old and stretched I think had and oversized tensioner pully snapped it racing a srt and got a stage two had to remove the oversized pulley with that belt.
#6104
Ended up being loose/broken intake manifold hardware causing. When pressure was applied to tensioner to compress it a bit while running it took out enough pressure off the blower (and the intake manifold) so the noise stopped.
Got new hardware with bigger washers and lock washers and all torqued down to 89in-lbs. Should be good now I think lol
Got new hardware with bigger washers and lock washers and all torqued down to 89in-lbs. Should be good now I think lol
#6106
Platinum Member
Join Date: 09-18-11
Location: pittsburgh
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
i also did a full black interior swap (havent found redline recaros yet tho) and i swapped in power windows and locks, need to finish the power locks tho, and im making a delete cover for the mirror switch, not too worried about power mirros lol
#6107
Premium Member
iTrader: (8)
Join Date: 02-23-11
Location: Ohio
Posts: 3,454
Likes: 0
Received 0 Likes
on
0 Posts
Ended up being loose/broken intake manifold hardware causing. When pressure was applied to tensioner to compress it a bit while running it took out enough pressure off the blower (and the intake manifold) so the noise stopped.
Got new hardware with bigger washers and lock washers and all torqued down to 89in-lbs. Should be good now I think lol
Got new hardware with bigger washers and lock washers and all torqued down to 89in-lbs. Should be good now I think lol
#6114
Member
iTrader: (1)
Join Date: 01-30-11
Location: Wisconsin
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
since i last came on here i got ksport coilovers drilled and slotted rotors fmsr performce catback new rims and tires
in the werks of collecting the last few parts for a ko4 turbo setup with a tr12 intercooler and piping.
currently on a m62with a 3.1 pulley been to years supercharged and loved it but now gonna try the turbo world still stock internals
in the werks of collecting the last few parts for a ko4 turbo setup with a tr12 intercooler and piping.
currently on a m62with a 3.1 pulley been to years supercharged and loved it but now gonna try the turbo world still stock internals
#6117
http://i1103.photobucket.com/albums/...ps47f26f6d.jpg
Sorry its a link.i find the quality goes to **** when i post the pic. Getting ready to order the tune for my sc build
Sorry its a link.i find the quality goes to **** when i post the pic. Getting ready to order the tune for my sc build
#6124
Senior Member
iTrader: (5)
I would be saving for that engine now if only it was a LAP. Anyways though, I'm on IRL wheels, Koni's and YYZ V.3 springs. Mostly complete SS/SC interior swap and turbo build on the way.
https://www.dropbox.com/sc/jh6w49b8fxkevqv/ZKLAW7_UTN
https://www.dropbox.com/sc/jh6w49b8fxkevqv/ZKLAW7_UTN