Official Base Model Thread
#180
Senior Member
Join Date: 09-19-08
Location: Michigan
Posts: 505
Likes: 0
Received 0 Likes
on
0 Posts
Post pictures padlock who cares it's a base model thread. Shoot i posted my car lowered on hubcaps....that's pretty sad man. If I can show that hillbilly mod then your car would be fine.
#181
Senior Member
iTrader: (9)
Join Date: 07-20-09
Location: Platteville, WI
Posts: 5,334
Likes: 0
Received 0 Likes
on
0 Posts
well here goes.. from old to current.. shes been thru alot
first: she was in an accident. i bought her and fixed her up to look like this when i first brought her home
then the mod bug started to hit with at first the calipers/trim being red n black bowtie
then tint n grilles
then my first set of retros (which i couldnt seal worth **** so i traded them)
traded them for these plus cash (bad idea)
then tsudo and tinted tails
got an intake used for dirt cheap
winter mode rims, and installed springs
then changed the theme up hardcore.. gold rims, stockers with 5000K HIDs, and gold bowties, black drums and calipers
then got TWM STS
then found gen2's i thought id like but not so much other than the ccfl halos
bought a LSJ mani/dp from this guy off here, in which you can see why i decided i hated the gold rims, that was like a weeks worth of driving and that brake dust was impossible to get off
gold rims sucked so i switched them to black which i now love
retinted the tails darker
fixed my low hanging tsudo
before
after
built retrofits and this time they dont leak.. pretty pumped.. turns out i love these way more than my first set so in the end it all worked out
and this is how she sits now. my mods are now going on under the hood cuz im happy with appearance finally lmao
i will post pics when i get under-the-hood stuff complete.. 2.4IM/TB/tune going on tuesday so ill be fully bolted N/A.. lots of painting going on tho right now lol
wow, that was an epic list of pics haha
first: she was in an accident. i bought her and fixed her up to look like this when i first brought her home
then the mod bug started to hit with at first the calipers/trim being red n black bowtie
then tint n grilles
then my first set of retros (which i couldnt seal worth **** so i traded them)
traded them for these plus cash (bad idea)
then tsudo and tinted tails
got an intake used for dirt cheap
winter mode rims, and installed springs
then changed the theme up hardcore.. gold rims, stockers with 5000K HIDs, and gold bowties, black drums and calipers
then got TWM STS
then found gen2's i thought id like but not so much other than the ccfl halos
bought a LSJ mani/dp from this guy off here, in which you can see why i decided i hated the gold rims, that was like a weeks worth of driving and that brake dust was impossible to get off
gold rims sucked so i switched them to black which i now love
retinted the tails darker
fixed my low hanging tsudo
before
after
built retrofits and this time they dont leak.. pretty pumped.. turns out i love these way more than my first set so in the end it all worked out
and this is how she sits now. my mods are now going on under the hood cuz im happy with appearance finally lmao
i will post pics when i get under-the-hood stuff complete.. 2.4IM/TB/tune going on tuesday so ill be fully bolted N/A.. lots of painting going on tho right now lol
wow, that was an epic list of pics haha
#183
Senior Member
iTrader: (9)
Join Date: 07-20-09
Location: Platteville, WI
Posts: 5,334
Likes: 0
Received 0 Likes
on
0 Posts
yea i have.. i had each set for a specific reason, ive just had odd luck with them causing me to get another different set.. lol but thats finally over with thank god..
as far as the tsudo, i really like how it sounds. the price just makes it that much better. the only thing i can really complain about is i wish the rear "can" wasnt quite so big cuz id prefer something more sleek looking.. and the piping hangs low in the one spot i showed before i fixed it, but it was a cheap fix, esp if you know someone that can weld stainless
as far as the tsudo, i really like how it sounds. the price just makes it that much better. the only thing i can really complain about is i wish the rear "can" wasnt quite so big cuz id prefer something more sleek looking.. and the piping hangs low in the one spot i showed before i fixed it, but it was a cheap fix, esp if you know someone that can weld stainless
#187
#192
Senior Member
iTrader: (9)
Join Date: 07-20-09
Location: Platteville, WI
Posts: 5,334
Likes: 0
Received 0 Likes
on
0 Posts
all i had to do was cut the pipe right after the resonator and "twist" or "rotated so to speak" the rear pipe section enough to lift the low spot up. i then re-welded the piping back together at that new location and bam! fixed!! lol.. pretty darn simple
no bending or anything like that was needed.. just a cut and a weld
no bending or anything like that was needed.. just a cut and a weld
#198
Senior Member
iTrader: (4)
Join Date: 06-22-08
Location: Here
Posts: 3,189
Likes: 0
Received 0 Likes
on
0 Posts
Here it is brand new
Then came tint, and stereo.
Then interior paint
Then Injen intake, TTR motor mount, trans bushings, strut brace, rsb, ARK antenna. No pics for those.
Then wheels and tinted tails. Painted the wheels black at some point.
Gen2s and custom fog lights.
Somewhere in here I took the TTR motor mount out.
Gen4s. They stayed stock for a couple weeks and then I retrofit RX330s into them.
Then I put TLs in my stock lights.
Next I swapped the steering wheel for a leather one with audio controls. No pics.
Had some issues with the lights so I opened them again and fixed some things and changed up the look. Also got 50w ballasts.
Currently I'm getting rid of the sub box in favor of a stock box with an upgraded sub. Need more room for kid ****. I also have a Powell rotated trans mount waiting to go in to replace the poly bushings. Next on the list is Pedders/TC setup. After that I'm doing Katzkin seat covers. Somewhere along the way i will also be adding a roof rack to accommodate a double stroller since we're trying for a second. Might black vinyl the roof. 2.4 body kit if I find the right price. After all that, I think I'll probably call it done.
Then came tint, and stereo.
Then interior paint
Then Injen intake, TTR motor mount, trans bushings, strut brace, rsb, ARK antenna. No pics for those.
Then wheels and tinted tails. Painted the wheels black at some point.
Gen2s and custom fog lights.
Somewhere in here I took the TTR motor mount out.
Gen4s. They stayed stock for a couple weeks and then I retrofit RX330s into them.
Then I put TLs in my stock lights.
Next I swapped the steering wheel for a leather one with audio controls. No pics.
Had some issues with the lights so I opened them again and fixed some things and changed up the look. Also got 50w ballasts.
Currently I'm getting rid of the sub box in favor of a stock box with an upgraded sub. Need more room for kid ****. I also have a Powell rotated trans mount waiting to go in to replace the poly bushings. Next on the list is Pedders/TC setup. After that I'm doing Katzkin seat covers. Somewhere along the way i will also be adding a roof rack to accommodate a double stroller since we're trying for a second. Might black vinyl the roof. 2.4 body kit if I find the right price. After all that, I think I'll probably call it done.
Last edited by JL-KA; 09-23-2011 at 11:52 AM.