2.4L engineering disabled/Pwn Reduced intake manifold
#1
New Member
Thread Starter
2.4L engineering disabled/Pwn Reduced intake manifold
So i went to the track today and my filter slipped off at some point, when i was on my way home my car would hikup randomly and the idling would change between 900RMP to 2000 Rmp at random times, when i got home i seen that the intake manifold was really dirty from the track and dust in the air (desert racing in the middle of nowhere on a dragstip) and i thought that might be the problem so i took off the manifold where the butterfly is and cleaned all around it to make sure no debree was getting in my engine. Once all done i tried starting my car and it gave me the error messages engineering disabled/Pwn Reduced what did i do wrong to make this happen and what can i do to fix it? please help
Just tried starting my car and it did and everything was all shaky and its telling my to service the fallowing, ESC, Traction Control and airbag. I haven't touched any of those components these were all fine until i cleaned the manifold..
Just tried starting my car and it did and everything was all shaky and its telling my to service the fallowing, ESC, Traction Control and airbag. I haven't touched any of those components these were all fine until i cleaned the manifold..
Last edited by sheape; 04-28-2013 at 01:26 AM.
#3
New Member
Thread Starter
well i had some good luck today after researching for hours i decided to get another throttle body and a re-learn and that solved the problems. i tryed just doing a re-learn but no luck. for all people that have this problem cobalts have throttle bodys that wear out so thats the fix!
Thread
Thread Starter
Forum
Replies
Last Post