zay52790

Okay, so i was doing some scanning in hpt and i realized my maf is reading nothing, which also explains my cel. But the problem is that i tried replacing the MAF, and its still reading nothing, i checked and all the cables looked fine.
anyone know what can cause the maf to read nothing, besides the maf itself?
if anyone could help me out that would be awesome, cuz my car is running like **** right now and im hoping to have it fixed before the CED meet coming up.

bump, someone plz let me know whats up
does anyone know if there could be a fuse involved with the MAF sensor?

zay52790

bump someone plzzz, help, i really want to get the car fixed before the meet

R4race

fuses
broken wire
bad ground

zay52790

i looked for fuses, i guess ill try and look for a bad ground , i didnt notice any broken wires, but i guess ill check again if thats the only possible problem

R4race

a wiring diagram helps alot

ericgt79

iTrader: (7)

aren't you suppose to disconnect the battery and wait a few mins and reconnect it to reset the maf?

R4race

Hot-Wire-Type MAF Sensors
http://www.autozone.com/az/cds/en_us...rInfoPages.htm

zay52790

wait so i should dissconnect the batt. and leave it and that will enable the maf to work?
btw, if this helps, in hpt, it wasnt reading zero, but was actually reading .25, but since nothing ever changed i figured that was probly just a base reading of some kind

ericgt79

iTrader: (7)

id start with that the maf needs to be reset to read the new intake if thats what you did install a new intake.

Coblasts

Check your email !
I would check the ground if the resetting thing doesnt work for you.

Not sure where it is but there is like 9 ground wires going to its location [G105]