What Have You Done To Your Cobalt Today?
Senior Member
iTrader: (1)
ya I'm in Springfield il and it's 9 hours. Also eddy my plates came in yesterday. I think you'll like them. I promise I didn't mean tosteal your name lol turbo, boost, and coblt were taken but I wanted it turbo related
Radiator-Lower Diffuser GM 25792391
Parts 4,9 and 12 are all essential for the radiator to operate effectively.
Last edited by Henry3959; 09-27-2017 at 10:50 AM.
The following users liked this post:
jdbaugh1 (09-27-2017)
Senior Member
iTrader: (1)
Thank you, good information. I'll have to look around as if I took this off I would have kept it but man it's not ringing any bells. Do you know does this part function to actually scoop air or create a low pressure zone behind it? If it is just to create a low pressure zone I could rig something up to work with my baffle plate. Otherwise I would need to get more creative. I currently don't have any heat issues but I don't want to hinder the function should I ever over-stress the cooling system.
Senior Member
iTrader: (1)
Slobodan Milošević
iTrader: (8)
it also helps create a more significant negative pressure area behind the radiator to help "pull" airflow through, which most people tend to overlook
+1, which is why it is located between the front and rear of the shroud
Last edited by Henry3959; 09-27-2017 at 11:37 AM.
The following users liked this post:
EmperorJJ1 (09-29-2017)
Senior Member
iTrader: (1)
took a long while to decide. finally did and debadged.
Attachment 61260
Attachment 61260
The following users liked this post:
EmperorJJ1 (09-29-2017)
Senior Member
iTrader: (1)
Senior Member
Join Date: 01-31-16
Location: Frozen Wasteland of the North
Posts: 5,281
Received 544 Likes
on
467 Posts
Gonna even more busy this weekend after the brake job
The following users liked this post:
EmperorJJ1 (10-02-2017)
Put the 160 MPH SS dash in I purchased and now I don't have to look at the TPMS warning light as 07 didn't have them. I still get the warning in the Display but can easily get that off. Waiting for all 4 to fail so I can do them all at once. Nice that the BCM stores the mileage so I don't have to have that changed.
Not sure if i am going to change out the Lights... I kind of like the red.... looks Orange in the pic.
Not sure if i am going to change out the Lights... I kind of like the red.... looks Orange in the pic.
Senior Member
iTrader: (1)
This happened while going WOT on highway ramp...I guess hot cold cycling and 21 PSI over 7 years took its toll on the plastic.
So I got this...Boost is a bit slower to build but IAT2 stays cooler. Time for some new MAPs and a new tune!
So I got this...Boost is a bit slower to build but IAT2 stays cooler. Time for some new MAPs and a new tune!
Senior Member
iTrader: (3)
Replaced my 80K mile factory control arms with brand new arms that I had a local machine shop press Moog CABs into. I highly recommend different CABs as even brand new, the OE rubber felt like dog ****.
Easy install and a dramatic difference in steering feel, traction and stability at WOT. What's scary is that the passenger side literally fell out when I pulled it from the cradle.
Old
New
Easy install and a dramatic difference in steering feel, traction and stability at WOT. What's scary is that the passenger side literally fell out when I pulled it from the cradle.
Old
New
Senior Member
Nice^^^^to anyone seeing that, Powell’s bushings are probably the best if money isn’t a concern. Just saying. He also has control arms with his bushings in them as well.