Carolina Cobalts
#3376
Senior Member
Join Date: 09-23-08
Location: Raleigh, NC
Posts: 6,621
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, they are locked... usually! I can pull it off and look at it I don't mind. Not that I can change much! We can do some datalogs or something... see if we can get your MAF straight!
#3377
#3378
Senior Member
Join Date: 09-23-08
Location: Raleigh, NC
Posts: 6,621
Likes: 0
Received 0 Likes
on
0 Posts
Sold it to a guy in Charlotte... for my power goals it was too small. Very efficient though... just too small for me.
For him it's fine. I'm running a Synapse now... but its getting swapped out for an ETS intercooler this weekend.
For him it's fine. I'm running a Synapse now... but its getting swapped out for an ETS intercooler this weekend.
#3380
Senior Member
Join Date: 09-23-08
Location: Raleigh, NC
Posts: 6,621
Likes: 0
Received 0 Likes
on
0 Posts
Extreme Turbo Systems intercooler. A perfectly sized, very high fin densitity, 85% efficient up to 35psi. With only a 1% pressure drop!
It's expensive though... Around $400 for just the intercooler, going to have to get 90's made, and mounting tabs for it... so prolly around $100 or so.
But it's all about efficiency and core size.
It's expensive though... Around $400 for just the intercooler, going to have to get 90's made, and mounting tabs for it... so prolly around $100 or so.
But it's all about efficiency and core size.
#3382
Senior Member
Join Date: 09-23-08
Location: Raleigh, NC
Posts: 6,621
Likes: 0
Received 0 Likes
on
0 Posts
yo brad all the ******* on here taht keep banning us need to go suck on a ******* ****. ******* slow ass ****** **** sucking bitches. need to get fukcin real. and **** this gay ass network.
well guess ill get banned now so im only hating on the ******* taht ban us everybody else is cool
Trav
fay nc
2009 united gray cobalt ss/superturbocharged
trifecta tune @ 30 psi,hahn cai, dejon cold pipe,hks bov, borla exhaust, 50 trim turbo, catless dp, cammed, fully build tranny, 150 shot, synapse intercooler, honed manifold, twin charged. 568 whp 679 wtq
well guess ill get banned now so im only hating on the ******* taht ban us everybody else is cool
Trav
fay nc
2009 united gray cobalt ss/superturbocharged
trifecta tune @ 30 psi,hahn cai, dejon cold pipe,hks bov, borla exhaust, 50 trim turbo, catless dp, cammed, fully build tranny, 150 shot, synapse intercooler, honed manifold, twin charged. 568 whp 679 wtq
#3383
East Coast Cobalts
Join Date: 01-30-06
Location: Spring Lake, NC
Posts: 1,130
Likes: 0
Received 0 Likes
on
0 Posts
https://www.cobaltss.net/forums/parts-66/19-tsw-nogaros-falken-tires-%24750-shp-198370/
Selling my 19s if anyone wants them!
Selling my 19s if anyone wants them!
#3386
Senior Member
Join Date: 09-23-08
Location: Raleigh, NC
Posts: 6,621
Likes: 0
Received 0 Likes
on
0 Posts
Alright let me know... and check your other thread... I'd still be willing to trade ya if they fit.
You'd get a better lighter wheel... and i'll get some bling for the baby hauler!
new intercooler that hopefully won't ******* crack!
You'd get a better lighter wheel... and i'll get some bling for the baby hauler!
new intercooler that hopefully won't ******* crack!
Last edited by 1badBlueberrySC; 12-12-2009 at 07:15 PM.
#3388
Senior Member
iTrader: (2)
Join Date: 05-10-08
Location: Kure Beach, NC
Posts: 11,788
Likes: 0
Received 0 Likes
on
0 Posts
hey blueberry, you have to modify that bumper to get that sucker to fit? i never would have thought twice if some1 said i would need to modify my bumper, i woulda been liek "oh yea whatever no problem" installed quite a few things on my buddys SS/SC yesterday and today, a ZZP heat exchanger being one, and OMFG getting the bumper to fit and line back up right took about 8 hours of playing, fiddling, filing, dremmeling. im so tired and exhausted of that bullshit.
But heres some pics of what i did the past 2 days to my buddys car:
Triple pod, Aeroforce interceptor, AEM wideband, Green underglow (had to wire in a switch, wasnt looking forward to that), OTTP 3" Intake, ZZP Heat Exchanger. Were getting ready for his TVS build. he has the TVS and injectors and everything in his trunk, we just need to put it on and get it tuned. looking for a tuner for the TVS, but they need to be local as we cant install it and drive it to the tuner since itll be running like **** i imagine. has to be kinda a 1-2-3 deal.
^missing the rear right grill piece since he bought the car
And took this picture just because i finally washed my car and remembered how sexy my tailights really were:
But heres some pics of what i did the past 2 days to my buddys car:
Triple pod, Aeroforce interceptor, AEM wideband, Green underglow (had to wire in a switch, wasnt looking forward to that), OTTP 3" Intake, ZZP Heat Exchanger. Were getting ready for his TVS build. he has the TVS and injectors and everything in his trunk, we just need to put it on and get it tuned. looking for a tuner for the TVS, but they need to be local as we cant install it and drive it to the tuner since itll be running like **** i imagine. has to be kinda a 1-2-3 deal.
^missing the rear right grill piece since he bought the car
And took this picture just because i finally washed my car and remembered how sexy my tailights really were:
#3389
Senior Member
Join Date: 09-23-08
Location: Raleigh, NC
Posts: 6,621
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, I already had my bumper cut so it didn't take me long... just a few adjustments...
But on a stock bumper you have to cut quite abit out.
GODDAMMN neons... I do however have a pretty sick TVS tune... I have done 3-4 of them now.
Just an FYI i'm not just a turbo guy here.
But she's back up and running strong again... LOVE HER AGAIN!
Guess that what happens when you spend good money on a QUALITY product instead of good money on a name
But on a stock bumper you have to cut quite abit out.
GODDAMMN neons... I do however have a pretty sick TVS tune... I have done 3-4 of them now.
Just an FYI i'm not just a turbo guy here.
But she's back up and running strong again... LOVE HER AGAIN!
Guess that what happens when you spend good money on a QUALITY product instead of good money on a name
#3392
Senior Member
Join Date: 09-23-08
Location: Raleigh, NC
Posts: 6,621
Likes: 0
Received 0 Likes
on
0 Posts
#3393
Senior Member
Join Date: 11-09-06
Location: Charlotte, NC
Posts: 545
Likes: 0
Received 0 Likes
on
0 Posts
we're good....trying to get everything settled and prepared....may have to consider different cars...i don't think the seats will fit in the cars...same as our niece's
good to hear that on your car...mine on the other hand....about to take a hammer to it
good to hear that on your car...mine on the other hand....about to take a hammer to it
#3394
Senior Member
Join Date: 08-05-06
Location: long island
Posts: 1,552
Likes: 0
Received 0 Likes
on
0 Posts
#3395
Senior Member
Join Date: 09-23-08
Location: Raleigh, NC
Posts: 6,621
Likes: 0
Received 0 Likes
on
0 Posts
Well thats good, hope you can figure something out man... it's tough I know. I'll tell ya now you won't be able to get 2 baby seats in your car!
#3396
#3397
Senior Member
Join Date: 11-09-06
Location: Charlotte, NC
Posts: 545
Likes: 0
Received 0 Likes
on
0 Posts
yea i'm trying to figure it out now...not really sure what I want to do and had a thought that it will not fit the 2 seats....not even sure if the wife's will fit 2 in her's. ARGH......now the stress to figure out what to do....may end up talking to a friend about another car.....know anyone looking for parts