Arizona BS Thread
05-25-2010, 05:10 PM
#1181
Yes but I have a cam/crank correlation code again and when it is idling for 20-25 seconds (or something in the area I get a high idle code. I am going to deal with the correlation code and see if I can just tune the cams in. If I cant then I am pulling the cams. I dont have any other option.
05-25-2010, 05:22 PM
#1182
Senior Member
iTrader: (4)
Join Date: 05-26-08
Location: Phoenix, Arizona
Posts: 2,097
Likes: 0
Received 0 Likes
on
0 Posts
Yes but I have a cam/crank correlation code again and when it is idling for 20-25 seconds (or something in the area I get a high idle code. I am going to deal with the correlation code and see if I can just tune the cams in. If I cant then I am pulling the cams. I dont have any other option.
05-25-2010, 05:43 PM
#1186
Does anyone know this guy?
RedlineSC101 OR Winkdoggydog101
He has ripped A LOT of people off on RedlineForums. A LOT of people for A LOT of money. Any info is appreciated, feel free to PM me.
Do you have a larger picture of the pic in your Sig? 
I'd like to see it/them!
RedlineSC101 OR Winkdoggydog101
He has ripped A LOT of people off on RedlineForums. A LOT of people for A LOT of money. Any info is appreciated, feel free to PM me.
I'd like to see it/them!
05-25-2010, 05:51 PM
#1187
Thanks, oh and I got a little more done on your tune. I cant go too wild on it since I cant see your WB. lol
The peeps in Tucson might, sorry no help here.
What happened? How many deals went sour?
Edit: I just read the post. That is messed.
What happened? How many deals went sour?
Edit: I just read the post. That is messed.
Last edited by SCcobaltSS; 05-25-2010 at 06:17 PM. Reason: Automerged Doublepost
05-25-2010, 07:51 PM
#1189
Senior Member
Thread Starter
iTrader: (3)
Join Date: 03-21-05
Location: Tucson, AZ
Posts: 2,914
Likes: 0
Received 0 Likes
on
0 Posts
To USMCFieldMP, that would be WinkyDog. Met him personally, all I remember was the ebay tazer. He talked alot of **** to Richie and pretty much copied his mods after the fact...
05-25-2010, 07:55 PM
#1191
Senior Member
iTrader: (1)
Join Date: 02-03-09
Location: Phoenix, Arizona
Posts: 4,881
Likes: 0
Received 0 Likes
on
0 Posts
he doesnt look ANYTHING like how i thought he would look
i thought he was a dumb redneck reading his retarded threads and his lack of vocabulary
hahaha what a dummy
i thought he was a dumb redneck reading his retarded threads and his lack of vocabulary
hahaha what a dummy
05-25-2010, 08:22 PM
#1192
Member
Join Date: 08-02-05
Location: Adams, MA
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
any of you have an adress for him he ripped me and a couple other people off i cant run his plate number till i get back to work. im on a two week training for the reserves right now.
05-25-2010, 09:03 PM
#1198
Member
Join Date: 11-16-09
Location: Mesa Arizona
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
it's an 06 ss/sc i bought it used with 8k miles on it, it has a 3" pulley aftermarket injectors but i don't know what size, airbox mod, i believe it's a stage 2 because redline is at 7k. so i was on the highway when the car would not accelerate, and boost was at 20 psi (normaly max is 17) but i was not full throttle. That turned out to be a bad cat, but they would not replace it, I fought for months until they finally fixed it. Now the car makes a loud vibrating nopise at 3k rpm, and has a leak at the exaust manifold. THey said it's normal, but i know it's not. Now if i am on the freeway, i downshift to third and shift at 6500, halfway through fourth the car will not accelerate, and it will stay that way for the next 5 miles, it has no power at all......and the exaust it deep and sounds like it's missing. The car is all around much slower now, it was pretty quick, now i almost had an si beat me, so I'm pissed. any help, or reference to a good mechanic would be much appreciated, I am used to my old camaro this is a whole new world for me