July mini meet
#1076
haha, i totally used that to do the install. i have the rear adjusted too high however, so i need to go a lower it.i saw how short the springs were, and adjusted the nut correspondingly, but it ended up sitting only slightly lower than stock, so i have to readjust it. that and when i did the fronts, my outer CV joint came apart, so i had to cut the clamp and reassemble the internals. i'm going to my parent's mechanic today to get that re-greased and clamped. what was that shop that you got yours tuned at again jimbo? i'm going to swing by there at the end of the week and have them even everything out.
GOOD MEET GUYS! sorry for holding everyone up, haha. andrew is pretty much the man.
GOOD MEET GUYS! sorry for holding everyone up, haha. andrew is pretty much the man.
#1078
no problem, something else i should not, when you go to autobachs, they will charge you like $80 bucks to adjust and cross level them. they will charge separately for the alignment. now seeing as the rear alignment is non adjustable make sure they only charge you for a 2 wheel alignment. they got me for a 4 wheel alignment the first time i went, the 2nd time i knew better.
#1079
haha ok, i'll make sure they only get me for 2. also, should i worry about my CV joint at all? i drove around all day yesterday with it unsealed, and i'm only about 99% sure i put it back right. i'll have the mechanic look at it, but i'm still a little iffy.
#1080
should be fine as long as it is resealed completely, and there is no dirt or debree in there.
#1082
great turn out guys and girl. I had alot of fun yesterday and was able to put more faces to names
Ill post pics tonight, was gonna take more, but everyone bailed on me after BJ's
Ill post pics tonight, was gonna take more, but everyone bailed on me after BJ's
#1083
#1085
#1091
#1096
#1100