yapster

received THIRD trunk and it's the wrong one you shipped the g5 trunk which i do not want or ordered last year, left it at the same place where you picked up the other two damage ones. come on kharrum, this is ridiculous !!!!!!!!!!!

Extreme Dimensions

iTrader: (17)

Sorry boss I don't pack your shipments. I will take blame as far as I can take it, this part was pre-packed with the part number from the Cobalt but you received the G5, I can't do much there. This is killing me as well since its Canada.

JUICED_SS

iTrader: (2)

For those of you that have installed your trunks, what method have you used to figure out where to drill the holes for the reverse lights and where to drill for the trunk latch? Did you just measure or use some kind of transfer method? I figure the reverse lights will be simple enough but I'm concerned about getting the trunk latch in the right spot on the first try. I definitely only want to drill the holes once! lol

RKRamos

iTrader: (11)

A lot of measuring, measure everything you think needs to be measured. Also, we used a piece of tape, covered the hole cut out the hole then used the outline as a guide to cut.

JUICED_SS

iTrader: (2)

Ok that gives me some idea. Thanks.

RKRamos

iTrader: (11)

Also, don't **** up....no pressure or nothing.

JUICED_SS

iTrader: (2)

no **** lol

RKRamos

iTrader: (11)

lol duct tape fixes everything.

JUICED_SS

iTrader: (2)

forget drilling then, i'll just duct tape it on lmao

RKRamos

iTrader: (11)

no ***** lol.

JUICED_SS

iTrader: (2)

***** aren't gonna do me any good if i mess it up lol

meh i have all day tomorrow so i'll figure it out

Extreme Dimensions

iTrader: (17)

dip the ends of the screws that are on the taillight in some grease like substance, this way all you have to do is put it up to our trunk and use the marks to drill in. The trunk latch, make sure you measure that one out.

JUICED_SS

iTrader: (2)

workin on it. i'll git r done!

Extreme Dimensions

iTrader: (17)

JUICED_SS

iTrader: (2)

Well it was a pita but I got it done earlier today. Still have fitment issues though. I got fed up trying to make adjustments and line everything up so I'll get back at it another day. Did everybody who installed theirs also use the rubber bump stops or not? And what were the 4 screws for? Nothing needed screws. It was just 4 bolts for the trunk, 2 bolts for the third brake light, and 3 bolts for the trunk latch.

RKRamos

iTrader: (11)

I did.

JUICED_SS

iTrader: (2)

I didn't put them on yet so maybe that will help with the fitment. What about the 4 screws? I didn't see any use for those. I seem to recall them being mentioned but I read back through several pages and couldn't find anything.

RKRamos

iTrader: (11)

Because the trunk didn't come with studs you'll have to use the screws to reverse mount the latches on, you'll need wide washers.

JUICED_SS

iTrader: (2)

Can you please post a pic of what you did? Feeling kinda dumb right now but I'm honestly having a hard time picturing it. Flame suit engaged. lol

RKRamos

iTrader: (11)

I'll post a pic tomorrow, it's 1:00 am here.

JUICED_SS

iTrader: (2)

Cool thanks. Same time here. I'm goin to bed. lol

JUICED_SS

iTrader: (2)

Still hoping to see some pics of this whenever you get a chance.


Did anybody keep the trunk shocks installed with this trunk or did everybody remove them?

conerboner

iTrader: (4)

i removed mine

Sox-Fan

iTrader: (7)

Remove them. They are so stiff that you could damage the trunk with them on when you try to close it. They will also be pushing up too hard on the trunk when it is latched. If you keep on only one you'll twist the trunk. I do believe that it is possible to buy lighter ones, Khurram may be able to steer you to them.

JUICED_SS

iTrader: (2)

So I believe I just remove those metal clips at the top and bottom of the shocks to be able to remove them, is that right?