Turbo Tech Racing Solid Mount Special This Weekend ONLY!
08-17-2007 | 03:13 PM
#1
Turbo Tech Racing Solid Mount Special This Week ONLY!
This week ONLY until August 26th 2007, when you purchase the Turbo Tech Racing Solid Upper engine mount; you have the option to add the Prothane Tranny bushing kit for ONLY $19.99! This is a complete set, includes both the front and rear bushings. (manual tranny only 2.0/2.2/2.4 L Cobalts)
SAVE OVER $40.00 on this special.
Here is a direct link to the Product Page:
http://www.turbotechracing.com/produ...idProduct=4933
Not valid on any past orders.
You must also select the tranny bushings under the "upgrade" section under the Turbo Tech Racing Solid Upper Cobalt Mount product page. Limit of 1 set of Prothane bushings for each TTR mount you order.
No discount on the Turbo Tech Racing Upper mount, prices are marked @ www.TurboTechRacing.com
Please post when you make a purchase for this setup!
Here is just a few examples of past orders, for the Turbo Tech Racing Solid Upper Mount, as they are custom made to your color specifications.
SAVE OVER $40.00 on this special.
Here is a direct link to the Product Page:
http://www.turbotechracing.com/produ...idProduct=4933
Not valid on any past orders.
You must also select the tranny bushings under the "upgrade" section under the Turbo Tech Racing Solid Upper Cobalt Mount product page. Limit of 1 set of Prothane bushings for each TTR mount you order.
No discount on the Turbo Tech Racing Upper mount, prices are marked @ www.TurboTechRacing.com
Please post when you make a purchase for this setup!
Here is just a few examples of past orders, for the Turbo Tech Racing Solid Upper Mount, as they are custom made to your color specifications.
Last edited by TurboTechRacing; 08-20-2007 at 10:31 AM.
08-17-2007 | 03:20 PM
#2
I'm running that mount in my car now, and I've had your tranny bushings in for a while. Really nice product, highly recommended. The mount looks really nice when the color combo matches the car too. 
08-17-2007 | 03:46 PM
#3
We have 100's of combos available. Bushings options are Red, Black, or Blue. Power Coating thare is many more options (listed when you order), and you can contact us for any color not listed for a custom quote.
08-19-2007 | 08:39 AM
#9
Banned
Joined: 08-02-07
Posts: 868
Likes: 0
From: CaLiFoRnIa BiShEs!
If you do the upper engine mount you wont need the Ingalls anymore. There is no point in running both.
08-19-2007 | 08:45 AM
#10
Senior Member
Joined: 05-19-06
Posts: 6,976
Likes: 1
From: Beaver, PA (outside Pittsburgh)
is this truely solid??? like more vibes then say the zzp poly mount??? i have the zzp but i am willing to get this cause of the deal
did this eliminate wheelhop???
did this eliminate wheelhop???
Last edited by Dead Zen; 08-19-2007 at 08:45 AM. Reason: Automerged Doublepost
08-19-2007 | 08:47 AM
#11
Banned
Joined: 08-02-07
Posts: 868
Likes: 0
From: CaLiFoRnIa BiShEs!
I have tranny bushing also and it did eliminate wheel hop. I ended up getting mine from CPP though. I also ended up getting the side motor mount from B-Woody. If you get these though you should have no wheel hop.
08-19-2007 | 02:08 PM
#13
Yes, via Fed Ex, however you must PM or Email me Aaron@TurboTechRacing.com with your address and product(s) and we will email you back a quote.
Last edited by TurboTechRacing; 08-19-2007 at 02:08 PM. Reason: Automerged Doublepost
08-19-2007 | 02:37 PM
#14
I didn't have wheelhop before, I already have poly CABs and tranny mounts, and I was running dual torque braces. This just made it look a lot better, other than that I noticed no real difference, but it didn't get worse and it weighs a lot less than my old setup with the mount, brackets and braces.
08-19-2007 | 10:56 PM
#19
Senior Member
Joined: 03-23-07
Posts: 14,118
Likes: 0
From: Michigan
The vibes are really known when they are first installed specailly when ac is on but after a few hundred miles the become (broken in) then there are a few but very lightly but for the performance you get out of the bushing and mount you wont care about the vibes 
and to TTR this is an awsome deal hope you get lots of sales TTR is one of the most trusted vendors on here in my opinion
and to TTR this is an awsome deal hope you get lots of sales TTR is one of the most trusted vendors on here in my opinion
08-20-2007 | 10:29 AM
#21
If you have a 2.2 and an injen intake it should fit. However there are some 2005 2.2L models that GM put a different style mount in. Best this to do is email me a photo of your stock mount @ Aaron@TurboTechRacing.com and I will let you know if it fits or not.
BTW We are extending this sale until next weekend as there was a great number of customers who are waiting to order once they get paid this week.
Last edited by TurboTechRacing; 08-20-2007 at 10:29 AM. Reason: Automerged Doublepost
08-20-2007 | 05:11 PM
#23
^^^ That is why most are choosing our mount as some have had issues with brackets bending. We have never had a structural issue on our mount, as it is well over the strength of the stock structure.