No, thank you John. I am also corresponding with Gloria on a hardcore bar and motor mounts. This may be too much awesomeness for me to handle all at once. Lol

Konis
YYZ's
Rotated mounts
Hardcore bar.

Should be a totally different animal.

 

Thats the set up i have and love it

 

anyone want to tell me where the white plastic disc goes on the Koni struts ?

I think it goes under the bump stop, but i didnt put it on there cuz it was really loose and i didnt want any rattles or anything flopping around. Is it necessary to have it on there ?

 

I cant remember let me check to see where i put mine, but i havent had any problems wherever i placed it

 

got these silencers from CED. There a plastic material and not rubber. They almost feel like there going to crack and dry out over time ... we shall see though.

 

Tein silencers are a rubber/poly type material.

Have been holding up great.

 

 

Staged, thats what i thought these were going to be .. nope there plastic. They are also cut on the back side i would assume to help them bend easier, then there is a bead of glue along the inside to keep them from splitting more. I hope John tested these out in winter.

thanks Eddie ! thats where i thought they went but i kept mine out lol ... it wont make a difference.

 

Yeah it probably wont lol but i put mine in either way. I didnt really see another place they could go

 

I did not test the spiral wrap that hyperco supplied. It is used on Ford Performance springs for the same thing. Hyperco make those.
I am using a spray material, and Hyperco and myself are monitoring the situation as we see what solution works best. And we will see how it goes. The springs have a lifetime warranty if they break or loose rate. I really dont have much patience to go through the "what ifs".

I have only ever seen one damaged YYZ spring ; it was from a collosal endo roll over that wrote the car off; I offered to replace it free of charge just to have a look at it and test what forces it went through to bend the spring sideways, but the owner never took me up on the offer.

 

I would use the bump stop isolator that Koni supply. Also, FE5 later (08 on?) bump stops are shorter than FE5 early and FE3.

 

I would of send the spring, i need to get coil wrap tho since my springs are making noises

 

you got the email addresses just supply the information and you shall receive.

 

I would but i got mine from someone here so idk if it still counts for me

 

Yeah same with me, got them new never installed from a memeber.

Got my silencers in today slaped them on and initial test results show it works.

 

Yup mine where used but still work great ill order mine on friday from ced

 

Anyone on FE5 YYZ Setup want to post pics of height?

 

Fe5 and Konis won't be any different actually is the spring that makes the difference not the shock or strut

 

google .......

 

Ive searched google... For several different setups and its the same 15 cars that show up. Howeverr i think i found what im looking for.

 

there all the same ! https://www.cobaltss.net/forums/susp...prings-287018/

(that took me 2 sec, btw)

 

YYZ & Koni yellows: 2 fingers in the front, 3 fingers in the back.
<insert "that's what she said" joke here>

 

Yup same gap i have on my springs well a tad less on the back but i might have bigger fingers who knows lol

 

lol
Well my 3 fingers in the picture measure exactly 2.5 inches. Whip out your ruler!

 

Lol we can leave it at that