View Poll Results: Are you excited about any of the products listed?
Voters: 121. You may not vote on this poll
TNT's New Product Lines - INFO Inside.
#28
Senior Member
Join Date: 03-28-06
Location: Wheaton, Illinois
Posts: 2,020
Likes: 0
Received 0 Likes
on
0 Posts
Sweet!!! You may be seeing me soon! Hopefully Ill have the car by end of next week up at Byron getting tuned and maybe Ill swing by afterward. We may have to talk very soon about this turbo swap, well maybe the kenne bell swap.... well I dunno they both sound very very tempting! Not too worried about forcing air in or out anymore with the motor.. hehe
#30
Senior Member
Join Date: 10-18-06
Location: Virginia
Posts: 950
Likes: 0
Received 0 Likes
on
0 Posts
Same ol' Song
TNT has been in talks with other manufacturers (which will be rename nameless, but are quality companies).
TNT will be offering the following products within a few months time:
-------------------------------------------------
2.0L LSJ Kenne Belle Supercharger Swap.
2.0L LSJ Kenne Belle/Turbo Twincharge kit.
-------------------------------------------------
ALL products that require dyno testing/tuning will not be marked up because of the dyno testing involved (like those other guys......the joys of owning your own dyno).
Thats all I got, stay tuned!
TNT will be offering the following products within a few months time:
-------------------------------------------------
2.0L LSJ Kenne Belle Supercharger Swap.
2.0L LSJ Kenne Belle/Turbo Twincharge kit.
-------------------------------------------------
ALL products that require dyno testing/tuning will not be marked up because of the dyno testing involved (like those other guys......the joys of owning your own dyno).
Thats all I got, stay tuned!
HAHN Twincharge - There was all kind of hype and even an article in a major magazine that said the it was available and boasted 400HP. Yet each time I called Hahn all I would get is that it was in it's final tuning stages and they should have something "next week". Ironically, I'd get the same answer every week, and now you don't even hear crickets on the forum about it. There are remnants of threads like, "What the hell happened to Hahn?", but no twincharge.
TAG Twinscrew S/C Swap - This is the latest and greatest mythycal monster as far as I know. So far they've managed to collect over $10K, get the S/C's in, then they fell off of the face of the forum.
Next in line? TNT
Will they follow suit, or break this vicious cycle of all talk and no boost?
Not saying that any of the projects are impossible. Just that I'll believe it when I see it.
All you guys that with your Boost Boners need to throttle back and do your research.
Sorry TNT, if you think I've done you wrong. Consider this a challenge to prove me wrong. I wish you would. If you do, you have my money.
Best of luck and wishes
#31
Senior Member
iTrader: (1)
Join Date: 04-30-06
Location: J-Town, Wisconsin
Posts: 14,901
Likes: 0
Received 0 Likes
on
0 Posts
way to be positive
I'm lookin forward to your new product Carter Expecially the see thru hood
I'm lookin forward to your new product Carter Expecially the see thru hood
Last edited by Cobalt_SSTuner; 05-10-2007 at 08:05 AM. Reason: Automerged Doublepost
#33
Senior Member
Join Date: 06-30-06
Location: Saint Joseph, MO
Posts: 1,762
Likes: 0
Received 0 Likes
on
0 Posts
I would definitely go for some clear tailights for sure. As far as the other stuff, it would be nice but the bank is hurting. I'm sure the price is going to be pretty steep.
#34
Banned
Thread Starter
Join Date: 04-16-06
Location: Sterling, IL
Posts: 1,960
Likes: 0
Received 0 Likes
on
0 Posts
Items I will look forward too:
2.2L Cams (That require no additional tuning)
2.2L Huge Flow Intake
2.2L Higher/Lower Comp Pistons
2.2L Megaflow Exhaust (Patent Pending Technology)
TNT Dynomite Intake Manifold (Patent Pending Technology)
Interior Neon Accessories
See through hoods. (Yes...You can literaly see through it and into the engine bay!)
TNT Dynomite Headers w/ Megaflow Technology.
TNT Dynomite Megaflow Booster (Gets that extra boost when you need it)
Couple of questions.
1. Will the cams work on the 07 2.2L w/ the sensors?
2. Is the intake manifold going to be made of plastic, aluminum, adamantium , or what?
3. What exactly is a Megaflow booster? Some sort of Nitrous? Maybe an afterburner?
4. Will you be doing dyno tests for some or all of these items? Or at least the boltons?
Sorry for the sarcasm.
2.2L Cams (That require no additional tuning)
2.2L Huge Flow Intake
2.2L Higher/Lower Comp Pistons
2.2L Megaflow Exhaust (Patent Pending Technology)
TNT Dynomite Intake Manifold (Patent Pending Technology)
Interior Neon Accessories
See through hoods. (Yes...You can literaly see through it and into the engine bay!)
TNT Dynomite Headers w/ Megaflow Technology.
TNT Dynomite Megaflow Booster (Gets that extra boost when you need it)
Couple of questions.
1. Will the cams work on the 07 2.2L w/ the sensors?
2. Is the intake manifold going to be made of plastic, aluminum, adamantium , or what?
3. What exactly is a Megaflow booster? Some sort of Nitrous? Maybe an afterburner?
4. Will you be doing dyno tests for some or all of these items? Or at least the boltons?
Sorry for the sarcasm.
to answer: 1. Id have to get a 2.2L w/ the sensors to know for sure what steps are needed to ensure they will work. Our cams for the 2.2L are trying to be so they do not have to be tuned, but granted that might be a long shot.
2. The Intake Manifold is going to be of some decent gauged aluminum, however we are adding our "Boost Escape" feature which is a built in safety feature (more below).
3. Megaflow Booster is...well...Its hard to explain without literaly saying it (since competition does read this).....think of it as a mini supercharger.
4. ALL products will be dyno tested on a COMPLETELY STOCK(or close too) vehicle.
Our Boost Escape Feature falls into the same lines of the plastic intake manifold safety feature. The plastic intake manifold is plastic for a reason (or in my opinion is). Its designed for if any sort of excessive boost, or nitrous backfire will simply shatter your intake manifold vs making your engine go boom.
The Boost Escape feature is aluminum, with improved designs to allow increased air flow.
Located on the manifold is a Circle, about 1" - 2" in diameter, that is covered with a plastic that is computer designed to blow out at 25psi. Plastic is incredibly cheap to manufacture, and our design allows for quick changeout within 10min.
In short, Your on the track...you over boost (or your nos backfires)...instead of your engine going boom, this piece of plastic blows out....you turn the car off, with a screw driver, and a hammer to properly seat the plastic boost escape mechanism, you screw back again, and your good to go another round vs finding a tow truck to get you and your car home.
#36
Banned
Thread Starter
Join Date: 04-16-06
Location: Sterling, IL
Posts: 1,960
Likes: 0
Received 0 Likes
on
0 Posts
I hear some familiar tunes being sung here but, let's take a look at history here.
HAHN Twincharge - There was all kind of hype and even an article in a major magazine that said the it was available and boasted 400HP. Yet each time I called Hahn all I would get is that it was in it's final tuning stages and they should have something "next week". Ironically, I'd get the same answer every week, and now you don't even hear crickets on the forum about it. There are remnants of threads like, "What the hell happened to Hahn?", but no twincharge.
TAG Twinscrew S/C Swap - This is the latest and greatest mythycal monster as far as I know. So far they've managed to collect over $10K, get the S/C's in, then they fell off of the face of the forum.
Next in line? TNT
Will they follow suit, or break this vicious cycle of all talk and no boost?
Not saying that any of the projects are impossible. Just that I'll believe it when I see it.
All you guys that with your Boost Boners need to throttle back and do your research.
Sorry TNT, if you think I've done you wrong. Consider this a challenge to prove me wrong. I wish you would. If you do, you have my money.
Best of luck and wishes
HAHN Twincharge - There was all kind of hype and even an article in a major magazine that said the it was available and boasted 400HP. Yet each time I called Hahn all I would get is that it was in it's final tuning stages and they should have something "next week". Ironically, I'd get the same answer every week, and now you don't even hear crickets on the forum about it. There are remnants of threads like, "What the hell happened to Hahn?", but no twincharge.
TAG Twinscrew S/C Swap - This is the latest and greatest mythycal monster as far as I know. So far they've managed to collect over $10K, get the S/C's in, then they fell off of the face of the forum.
Next in line? TNT
Will they follow suit, or break this vicious cycle of all talk and no boost?
Not saying that any of the projects are impossible. Just that I'll believe it when I see it.
All you guys that with your Boost Boners need to throttle back and do your research.
Sorry TNT, if you think I've done you wrong. Consider this a challenge to prove me wrong. I wish you would. If you do, you have my money.
Best of luck and wishes
Id like to point out TNT will NEVER...EVER take "pre orders" and use that as budget to help design/fabricate a project.
As it stands right now, and will in the very far future.
TNT will never accept "pre orders" on products that we have not produced and are not in testing.
TNT will NEVER release a product before it has been properly tested (1month min.)
In short, We make the kit, we will get you guys interested (showing the different stages of the kit being developed). Get it up and running on one of our prototype testers/sponsorship vehicles. wait 2ish weeks. Provide numbers, and a price. and assuming the sponsored/prototype vehicle hasnt died yet. We will accept pre orders to know how many we're looking at making. (Obviously we have to order parts, like the Intercooler, or the S/C, or the T/C itself).
All kits will be hand made, and inspected and flow bench tested to ensure proper fabrication was done.
I hope this answers some of your questions.
But I do know for the 2.4L we will be producing:
8.3:1 to 13.5:1 and many steps in between.
Granted the 2.4 guys are kinda mixed, alot of us wanna go turbo, and some wanna stay N/A.
However that might change in time.
Last edited by TCarter; 05-10-2007 at 02:22 PM. Reason: Automerged Doublepost
#37
Well Im looking forward to the kenney bell, Twin charging would be nice but Ill wait until #'s and price come out and make my choice. Hopefully it all gets worked out unlike Hahn like Jumpin Fool pointed out.
#40
Well, its good to know that you're planning on offering more than 1 or 2 different ones.
#41
Senior Member
Join Date: 11-22-06
Location: Orlando, FL
Posts: 1,505
Likes: 0
Received 0 Likes
on
0 Posts
TNT has been in talks with other manufacturers (which will be rename nameless, but are quality companies).
TNT will be offering the following products within a few months time:
2.4L Megaflow Exhaust (Patent Pending Technology)
2.4L Huge Flow Intake
2.4L Turbo Kit w/ Tuning (HPT)
2.4L Cams (Including Turbo Specific)
2.4L Higher/Lower Comp. Pistons
TNT will be offering the following products within a few months time:
2.4L Megaflow Exhaust (Patent Pending Technology)
2.4L Huge Flow Intake
2.4L Turbo Kit w/ Tuning (HPT)
2.4L Cams (Including Turbo Specific)
2.4L Higher/Lower Comp. Pistons
#42
Senior Member
Join Date: 02-23-07
Location: Orange, CA
Posts: 1,120
Likes: 0
Received 0 Likes
on
0 Posts
to answer: 1. Id have to get a 2.2L w/ the sensors to know for sure what steps are needed to ensure they will work. Our cams for the 2.2L are trying to be so they do not have to be tuned, but granted that might be a long shot.
2. The Intake Manifold is going to be of some decent gauged aluminum, however we are adding our "Boost Escape" feature which is a built in safety feature (more below).
3. Megaflow Booster is...well...Its hard to explain without literaly saying it (since competition does read this).....think of it as a mini supercharger.
4. ALL products will be dyno tested on a COMPLETELY STOCK(or close too) vehicle.
Our Boost Escape Feature falls into the same lines of the plastic intake manifold safety feature. The plastic intake manifold is plastic for a reason (or in my opinion is). Its designed for if any sort of excessive boost, or nitrous backfire will simply shatter your intake manifold vs making your engine go boom.
The Boost Escape feature is aluminum, with improved designs to allow increased air flow.
Located on the manifold is a Circle, about 1" - 2" in diameter, that is covered with a plastic that is computer designed to blow out at 25psi. Plastic is incredibly cheap to manufacture, and our design allows for quick changeout within 10min.
In short, Your on the track...you over boost (or your nos backfires)...instead of your engine going boom, this piece of plastic blows out....you turn the car off, with a screw driver, and a hammer to properly seat the plastic boost escape mechanism, you screw back again, and your good to go another round vs finding a tow truck to get you and your car home.
2. The Intake Manifold is going to be of some decent gauged aluminum, however we are adding our "Boost Escape" feature which is a built in safety feature (more below).
3. Megaflow Booster is...well...Its hard to explain without literaly saying it (since competition does read this).....think of it as a mini supercharger.
4. ALL products will be dyno tested on a COMPLETELY STOCK(or close too) vehicle.
Our Boost Escape Feature falls into the same lines of the plastic intake manifold safety feature. The plastic intake manifold is plastic for a reason (or in my opinion is). Its designed for if any sort of excessive boost, or nitrous backfire will simply shatter your intake manifold vs making your engine go boom.
The Boost Escape feature is aluminum, with improved designs to allow increased air flow.
Located on the manifold is a Circle, about 1" - 2" in diameter, that is covered with a plastic that is computer designed to blow out at 25psi. Plastic is incredibly cheap to manufacture, and our design allows for quick changeout within 10min.
In short, Your on the track...you over boost (or your nos backfires)...instead of your engine going boom, this piece of plastic blows out....you turn the car off, with a screw driver, and a hammer to properly seat the plastic boost escape mechanism, you screw back again, and your good to go another round vs finding a tow truck to get you and your car home.
#44
Banned
Thread Starter
Join Date: 04-16-06
Location: Sterling, IL
Posts: 1,960
Likes: 0
Received 0 Likes
on
0 Posts
Nothings on google...
Its TNT technology currently in the patent pending state.
I finished up on the intake mani today. Just awaiting battieries for the digi cam to take pics, and the inserts.
Now thats not very nice. I guess its easy to act hard over a computer, isnt it?
Its TNT technology currently in the patent pending state.
I finished up on the intake mani today. Just awaiting battieries for the digi cam to take pics, and the inserts.
Now thats not very nice. I guess its easy to act hard over a computer, isnt it?
Last edited by TCarter; 05-10-2007 at 06:09 PM. Reason: Automerged Doublepost
#47
Senior Member
Join Date: 01-15-05
Location: Ottawa
Posts: 5,126
Likes: 0
Received 0 Likes
on
0 Posts