Wheels and Tires All about wheels and tires. What fits, show tires, and so on

*Official* List of SS/TC Rims

Thread Tools
 
Search this Thread
 
Old 12-26-2009 | 12:15 AM
  #126  
jboogie's Avatar
Senior Member
iTrader: (3)
 
Joined: 06-23-09
Posts: 1,135
Likes: 1
From: western NC
Anyone found any 17X9 that fit yet? 8.5 even?

I found these ( http://www.speedalliance.com/catalog...roductid=21370) but would prefer a less expensive option. Especially if I don't know if they'll fit or not.
Old 01-07-2010 | 11:39 PM
  #127  
stho0785's Avatar
New Member
 
Joined: 10-26-09
Posts: 33
Likes: 0
From: Dawsonville
17 in DR 33

I am looking at purchasing some 17 in wheels for my 09 SS/TC. Does anyone know or think if the DR 33's 17 x 7.5 fit over the Brembos? Also, I am looking at the tire size of 235-45-17. The tires are a little wider, but are very close to the same rolling height. Anyone have any information?

Thanks!
Old 01-12-2010 | 10:18 PM
  #128  
misterspockyall's Avatar
Banned
 
Joined: 05-22-09
Posts: 123
Likes: 0
From: Ohio
Ok, just one more confirmation w/ pics that the 17" SS/NA rims DO clear the Brembos without spacers. Is it close as hell? Yes. A small spacer wouldn't hurt, but they are not going to rub as previously confirmed by a few guys on here. I always just appreciate multiple confirmations











I hope this helps give an idea about the gap between on this setup. My SS/NA's are pretty scuffed up, but for a cheap winter solution, I think they'll do nicely.
Old 02-02-2010 | 12:19 PM
  #129  
mongorat427's Avatar
Premium Member
iTrader: (82)
 
Joined: 07-23-09
Posts: 6,064
Likes: 9
From: pittsburgh


Still looking for 17 x 9
Old 02-02-2010 | 01:16 PM
  #130  
spike's Avatar
Senior Member
 
Joined: 12-01-06
Posts: 1,700
Likes: 1
From: IN
Originally Posted by mongorat427


Still looking for 17 x 9
how much are you wanting to spend? For alittle over 2k CCW has a few lite race wheels. If not them your out of luck
Old 02-02-2010 | 11:59 PM
  #131  
occsdude's Avatar
Senior Member
iTrader: (1)
 
Joined: 08-23-07
Posts: 3,940
Likes: 0
From: Haymarket/Norfolk Virginia
subd
Old 02-26-2010 | 06:37 PM
  #132  
JTurner.CTN's Avatar
Banned
 
Joined: 04-30-09
Posts: 459
Likes: 0
From: Virginia
Here are the 18" MSR 045 Black w/Red Lip on a 09' Cobalt SS/TC wrapped around Nitto 555 extremes stock tire sizes.







Resized.

Last edited by JTurner.CTN; 02-27-2010 at 06:48 PM.
Old 02-26-2010 | 08:35 PM
  #133  
soundjunky's Avatar
Senior Member
iTrader: (4)
 
Joined: 05-26-09
Posts: 13,612
Likes: 41
From: Calgary, Alberta
Sorry forgot to resize
tell me about it!?

trying to be all "stealth" and keep up on some threads between jobs @ work, and the pics were so big I didn't have a hope of seeing them on my computer...

Even now, on my laptop I can't see the pictures... resize would be appreciated
Old 02-26-2010 | 09:44 PM
  #134  
NickD's Avatar
Senior Member
 
Joined: 07-12-09
Posts: 791
Likes: 15
From: NJ
Wow! Really sharp looking! They fill my 28" monitor nicely :p
Old 02-27-2010 | 06:49 PM
  #135  
JTurner.CTN's Avatar
Banned
 
Joined: 04-30-09
Posts: 459
Likes: 0
From: Virginia
Originally Posted by soundjunky
tell me about it!?

trying to be all "stealth" and keep up on some threads between jobs @ work, and the pics were so big I didn't have a hope of seeing them on my computer...

Even now, on my laptop I can't see the pictures... resize would be appreciated
Images resized for you lol
Old 02-27-2010 | 09:34 PM
  #136  
soundjunky's Avatar
Senior Member
iTrader: (4)
 
Joined: 05-26-09
Posts: 13,612
Likes: 41
From: Calgary, Alberta
thank you very much!!
Old 03-01-2010 | 03:17 PM
  #137  
soundjunky's Avatar
Senior Member
iTrader: (4)
 
Joined: 05-26-09
Posts: 13,612
Likes: 41
From: Calgary, Alberta
Has anyone tried any G6 wheels?

There's supposed to be a 17" steel "ralley wheel", in addition to others.

Has anyone confirmed that hte G5-GT 17" wheels fit (they really look like they should)
Old 03-01-2010 | 03:28 PM
  #138  
occsdude's Avatar
Senior Member
iTrader: (1)
 
Joined: 08-23-07
Posts: 3,940
Likes: 0
From: Haymarket/Norfolk Virginia
what about the msr style 065?
Old 03-04-2010 | 08:27 PM
  #139  
cobalt9123's Avatar
Senior Member
 
Joined: 05-22-07
Posts: 1,271
Likes: 0
From: Winder, GA
I'm curious as to how much the DR-34's weigh? I'm looking to put some slicks or drag radials on these for the track this year....thanks
Old 03-13-2010 | 02:25 AM
  #140  
soundjunky's Avatar
Senior Member
iTrader: (4)
 
Joined: 05-26-09
Posts: 13,612
Likes: 41
From: Calgary, Alberta
I'm wondering if anyone here has tried fitting any OE wheels - other than C-SS wheels.

such as:
Pursuit/G5 GT 17" rims
G6 GT rims
Solstice Rims
Sky rims

I don't think I've read of anyone mentioning any of these but considering the number of these cars I've seen pictured with aftermarket rims, I'd think that many sets are sitting in the corner of someones garage, or basement just collecting dust.
Old 03-13-2010 | 05:07 AM
  #141  
Menace Kustoms's Avatar
Senior Member
 
Joined: 08-21-09
Posts: 717
Likes: 0
From: So. Cal.
Solstice or Sky rims won't fit without spacers. They have more offset than the stock wheels, almost 50 if I remember correctly.
Old 03-13-2010 | 12:44 PM
  #142  
soundjunky's Avatar
Senior Member
iTrader: (4)
 
Joined: 05-26-09
Posts: 13,612
Likes: 41
From: Calgary, Alberta
Originally Posted by Menace Kustoms
Solstice or Sky rims won't fit without spacers. They have more offset than the stock wheels, almost 50 if I remember correctly.
thank you for the reply
Old 03-19-2010 | 06:10 PM
  #143  
JUICED_SS's Avatar
Senior Member
iTrader: (2)
 
Joined: 03-24-07
Posts: 588
Likes: 1
From: Georgetown, ON
solstice gxp rims are 55mm
Old 03-19-2010 | 07:11 PM
  #144  
coby-ss's Avatar
New Member
 
Joined: 11-16-08
Posts: 29
Likes: 0
From: montreal
how cabn the Maxxim Knight fit with a bolt pattern 4x110 ? the cobalt have a bolt pattern of 5x110
Old 03-20-2010 | 01:48 AM
  #145  
jboogie's Avatar
Senior Member
iTrader: (3)
 
Joined: 06-23-09
Posts: 1,135
Likes: 1
From: western NC
well guys, thought I found some 17x9s in a Rial Nogaro 30mm offset. They were produced but after several contacts with Tirerack (the only US importer for Rial) they are no longer in production. http://www.ityre.com/en/disks/catalog/rial/1469/

So, now anyone know of a decent 17x8 with a 35mm or less offset that's not a truck wheel?
Old 03-22-2010 | 12:46 AM
  #146  
D-mac's Avatar
Premium Member
iTrader: (5)
 
Joined: 03-15-10
Posts: 1,587
Likes: 1
From: Ontario, Canada
Anyone found a Steel 17" wheel that will fit?
Old 03-22-2010 | 12:56 AM
  #147  
DangerZone's Avatar
New Member
 
Joined: 08-08-09
Posts: 116
Likes: 0
From: La Ronge, Sask
does anyone know if the 17" gunmetal competition wheels that came on the ion redline fit??
Old 03-23-2010 | 01:33 AM
  #148  
DangerZone's Avatar
New Member
 
Joined: 08-08-09
Posts: 116
Likes: 0
From: La Ronge, Sask
anyone??? come on someone has to know
Old 03-23-2010 | 01:44 AM
  #149  
soundjunky's Avatar
Senior Member
iTrader: (4)
 
Joined: 05-26-09
Posts: 13,612
Likes: 41
From: Calgary, Alberta
^^^

Dude!!

I love the sig pic!!

all of the coolest women I've known seem be from SK!
Old 03-23-2010 | 01:58 AM
  #150  
DangerZone's Avatar
New Member
 
Joined: 08-08-09
Posts: 116
Likes: 0
From: La Ronge, Sask
haha ya most people in sask are friendly

seriously nobody knows? thats a first haha

Last edited by DangerZone; 03-23-2010 at 01:58 AM. Reason: Automerged Doublepost



All times are GMT -4. The time now is 08:45 AM.