Wheels and Tires All about wheels and tires. What fits, show tires, and so on

Worst Carwash EVER!

Thread Tools
 
Search this Thread
 
Old 03-24-2006 | 10:07 AM
  #1  
astrocrep's Avatar
Thread Starter
Senior Member
 
Joined: 06-14-05
Posts: 918
Likes: 0
From: New Jersey
Worst Carwash EVER!

I went to this car wash to get my car all nice and clean.

In order for me to get my car "lined up" with the tracks I had to make a really tight turn. Anyway, as I make the turn, I realize I am still going to be about a foot off from lining up with the tracks.

I let the clutch up to let the car roll back, and the attandent was like "nah nah your good just pull up" so I do, and as I do, I feel the front of the tire tap the track. So I again let the clutch up and start to roll back.

Again, he insists I'm fine, so I again pull forward. Again my tire bumps the track and he is still waving me forward. So I give it a little gas, and all of a sudden, the left front tire (the one in question) raises up and then drops back down, I am fairly sure I just banged the rubber.

So I tell the attendant I wanted a full wash (including rims) He reaches down and cleans all the rims, and them I get pulled through the car wash (this is one of the ones you sit in your car)

I get home (this place is about an hour away from me, a stopped there after leaving a friends house out of state) and talk a look at my car, and this is what I see: (pics below) Man, am I pissed. I don't know what to do. Obviously, the carwash "Cannot be held responsible" but as far as fixing this.

Can the wheel just be repainted. I am pretty sure there is no really damage to the wheel, I believe the paint is just scrapped off. I really don't want to have to buy a new wheel.

Anybody have any suggestions With prices?

Thanks,
Rich
Attached Thumbnails tire-main.jpg   tire-close-1.jpg   tire-close-2.jpg   tire-close-3.jpg  
Old 03-24-2006 | 10:11 AM
  #2  
arsenal21's Avatar
Senior Member
 
Joined: 12-10-04
Posts: 1,206
Likes: 0
From: Cleveland, OH
^^^^^^^^ And that's why you don't take your SS through a regular car wash.

Sucks. But those things are notorius for eating rim edges. Good luck gettin that fixed.
Old 03-24-2006 | 10:11 AM
  #3  
mycavisux97's Avatar
Senior Member
 
Joined: 05-03-05
Posts: 538
Likes: 0
From: canandaigua, New York
thats shitty dude, sorry about that. best bet, take it to the dealer, see what they'll do.
Old 03-24-2006 | 10:13 AM
  #4  
R33P3R007's Avatar
360 L337 User
 
Joined: 08-11-05
Posts: 7,454
Likes: 0
From: Philadelphia, Pa
yup^^^^ somewhere i saw a thread on touchup paint for them, but i doubt it will fix that
Old 03-24-2006 | 10:14 AM
  #5  
astrocrep's Avatar
Thread Starter
Senior Member
 
Joined: 06-14-05
Posts: 918
Likes: 0
From: New Jersey
I goto this one car wash in Summit,NJ where I work about once a week. That place is the best.

Trust me ppl is summit,nj would raise hell if a car wash was effing their Mercedes and BWM rims...

I guess that what I get for being on podunk-ville.

-Rich
Old 03-24-2006 | 10:36 AM
  #6  
vic_romano's Avatar
Senior Member
 
Joined: 09-26-05
Posts: 579
Likes: 0
From: Rochester, NY
i will never take my car to an auto wash. Spray bay and hand wash all the way. My mom took her brand new Jeep Cherokee through one and it sliced both her tires. Luckily they paid full damage.

but sorry about the rims nontheless.
Old 03-24-2006 | 10:44 AM
  #7  
plyboy-illest's Avatar
Senior Member
 
Joined: 01-02-05
Posts: 5,183
Likes: 0
From: Toronto (woodbridge)
thats sucks man... i feel ur pain just looking at those pics
Old 03-24-2006 | 10:45 AM
  #8  
distillion's Avatar
Senior Member
 
Joined: 05-11-05
Posts: 6,298
Likes: 1
From: mississauga
i have never taken my cars to a car wash with the rollers, you are just asking for it, sucks though man, atleast you know now.
Old 03-24-2006 | 10:50 AM
  #9  
BLKSS's Avatar
Senior Member
 
Joined: 07-28-05
Posts: 2,782
Likes: 0
From: Ottawa
Touchless is the ONLY carwash I know of.
Old 03-24-2006 | 12:20 PM
  #10  
2K5SS/SC?'s Avatar
Senior Member
 
Joined: 07-08-05
Posts: 6,200
Likes: 0
From: Niceville, FL
Carwashes are the devil. Take the time and do it by hand!
Old 03-24-2006 | 12:27 PM
  #11  
Cobalt30's Avatar
Senior Member
 
Joined: 07-17-05
Posts: 2,375
Likes: 0
From: Western Massachusetts
Touchless is the ONLY carwash I know of.
and thats the only way i go as well. I dont want anything more to touch my car then it has to.

but if i was you i would write a complaint to the carwash and express your views on them clearly. You never know what they will do until you try. and im sorry bout the rim. That sux big time.
Old 03-24-2006 | 12:28 PM
  #12  
3fo893013L's Avatar
Banned
 
Joined: 03-30-05
Posts: 6,980
Likes: 0
those are deep stratches...those won't come out...
Old 03-24-2006 | 12:42 PM
  #13  
badg1rl's Avatar
Senior Member
 
Joined: 09-26-05
Posts: 2,699
Likes: 1
From: Long Island NY
damn that has to be the shittiest thing i have seen happen to someone. that realllllly sucks.
Id definately go back and kick the **** out of the attendant, what a jerkoff.

good luck getting that all fixed/
Old 03-24-2006 | 12:56 PM
  #14  
Sempher55's Avatar
Senior Member
 
Joined: 05-30-05
Posts: 808
Likes: 0
From: USA
hand wash baby!
Old 03-24-2006 | 01:14 PM
  #15  
SharpSS's Avatar
New Member
 
Joined: 03-01-06
Posts: 91
Likes: 0
From: North Chicago, Illinois
I found this out also. I bumped a curve turning a corner & it just seemed like the tire bumped it. Nope, the rim got scratched up. I will have to redo the rims sometime in the next year also. It wasn't as bad as his picture though.
Old 03-24-2006 | 01:16 PM
  #16  
cvenom2122's Avatar
Senior Member
 
Joined: 11-24-04
Posts: 1,652
Likes: 1
From: newark, DE
Thumbs up

go and get some gun metal looking paint wet sand the area (so it is smooth) then repaint make sure paint is close enough in color thoe, or just take it to a air brusher and let him blend it in
Old 03-24-2006 | 01:31 PM
  #17  
discofreak's Avatar
Member
 
Joined: 09-30-05
Posts: 349
Likes: 0
From: Richmond, TX
for a second there, i thought you were going to talk about how one of the big brushes ripped your spoiler off. (i was kind of disappointed)
Old 03-24-2006 | 01:50 PM
  #18  
dcshoes23's Avatar
Senior Member
 
Joined: 01-19-05
Posts: 619
Likes: 0
From: Mississauga, Ontario
That sucks, was it just one wheel? I only take mine to the carwash in the winter when it's too cold out and I have my steelies on. Let us know how you fix it and how much it costs.
Old 03-24-2006 | 02:10 PM
  #19  
astrocrep's Avatar
Thread Starter
Senior Member
 
Joined: 06-14-05
Posts: 918
Likes: 0
From: New Jersey
Yeah its just the one wheel that bumped when I went in.

My Local chevy dealer quoted me $625.99 for a new wheel... ef that... I guess I am just screwed for now.

Edit: I might see if I can grab a wheel off of ebay.

-Rich
Old 03-24-2006 | 03:58 PM
  #20  
bluesscobaltSPC1's Avatar
New Member
 
Joined: 03-13-06
Posts: 8
Likes: 0
From: Reading,PA
I used to believe in automatic carwashes but I can tell you one thing. The ones with the brushes and stuff put the swirl marks on you're paint. Just get the Mr. Clean car wash kit and you won't even have to worry about spotting. Just make sure you change the filter as suggested.
Old 03-24-2006 | 04:02 PM
  #21  
JimmiLS05's Avatar
Junior Member
 
Joined: 07-11-05
Posts: 484
Likes: 0
From: Appleton, Wi
Same chit happened to me too... it sucks...
Old 03-24-2006 | 04:11 PM
  #22  
Mercury's Avatar
Senior Member
 
Joined: 06-28-05
Posts: 4,194
Likes: 0
From: Wilmington, DE
This is why you must take the time and do it yourself.

If you don't have time... just leave your car dirty.
Old 03-24-2006 | 05:31 PM
  #23  
IonNinja's Avatar
Senior Member
 
Joined: 07-29-05
Posts: 7,926
Likes: 0
From: AZ
if i don't wash my car by myself (I never get it as shiny as other peoples) I take it to one of those places at the gas stations where they have people wash your car. They still run it through a machine but I haven't had any problems yet. Plus they seem to do a much better job than I do (I think they've got way better products) and they're about 4 hours faster too!
Old 03-24-2006 | 05:45 PM
  #24  
mycavisux97's Avatar
Senior Member
 
Joined: 05-03-05
Posts: 538
Likes: 0
From: canandaigua, New York
i just don't go through the automatic washes, i take it into a bay, spray it off witht he pressure washer, scrub the **** out of it with the foaming brush, and rinse, no problems here
Old 03-24-2006 | 06:17 PM
  #25  
ninja44's Avatar
Senior Member
iTrader: (1)
 
Joined: 07-01-05
Posts: 1,654
Likes: 0
From: Toronto
As far as I know there is nobody here in the GTA that can match the factory paint on these rims. Your options are...

1. Buy a new wheel
2. Buy a used one off of EBay
3. Get the dealer to send it up to Michigan to get it refinshed.

Good luck man I feel your pain.


Quick Reply: Worst Carwash EVER!



All times are GMT -4. The time now is 01:27 PM.